WIRING
Standard (pre-leaded) model Connector model, pre-leaded connector model
Note 1
ItemInsulation resistance Dielectric strength Initial contact resistance Mating/unmating force Mating cycles Specifications
Max. 100M Ω (by 500Vdc megger)1,500Vac for 1 minute (between contacts, and between contact and connector housing)Max. 40m Ω (with 3A current to connected male and female connectors. Semiconductor lead-specific resistance not included.) 0.4 to 4.0 N per contact
5010 to 55Hz, 1.5mm peak-to-peak amplitude, for 2 hours each in X, Y and Z directions300m/s Connector nut tightening torque Min. 0.8N·m*2 Cable pullout strength Vibration resistance Impact resistance Protective structure Min. 100 N
2 , 3 times each in X, Y and Z directionsIP67-10 to +70ËšC-20 to +80ËšCMax. 95% RH Ambient operating temperature Ambient storage temperature Ambient operating humidity Gold-plated brassContact holder: Glass-lined polyester resinHousing: Polyester elastomerCoupling: Ni-plated brassO-ring: NBR Material Contacts:
Note 1: Specifications assume Yamatake male/female connectors.Note 2: The recommended torque is 0.4 to 0.6N-m. If fastened poorly, the IP67 protection is lost, or looseness occurs. Fasten the connector securely by hand. 6