catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
P. 08
P. 09
P. 10
P. 11
P. 12
P. 13
P. 14
P. 15
P. 16
P. 17
P. 18
P. 19
P. 20
P. 21
P. 22
P. 23
P. 24
P. 25
P. 26
P. 27
P. 28
P. 29
P. 30
P. 31
P. 32
P. 33
P. 34
P. 35
P. 36
P. 37
P. 38
P. 39
P. 40
P. 41
P. 42
P. 43
P. 44
P. 45
P. 46
P. 47
P. 48
P. 49
P. 50
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You may also be interested in
Electric motor, Linear module, Electric actuator, Servo-motor, Linear drive unit
Text version of the page
| 4) Remove the shutter from the shutter guide and pass the new shutter through it. | ||||||||||||||||||
| 5) Reinstall the shutter and the slider cover using the reverse of the above procedure. | ||||||||||||||||||
| NOTE | ||||||||||||||||||
| Do not fully tighten the screws to secure the shutter on the endplate side at this time. Fully tighten these screws after adjusting for shutter looseness in step 6. | ||||||||||||||||||
| 6) Tighten the screws while pulling on the shutter with your fingers so that there is no looseness in the shutter. | ||||||||||||||||||
| Acaution _ Do not press down on the shutter with excessive force. Pressing down hard on the shutter may cause the shutter to warp. | ||||||||||||||||||