Through-Hole Resistors 2013
92Pages

{{requestButtons}}

Catalog excerpts

Through-Hole Resistors 2013 - 1

www.yageo.com RoHS Compliant ISO 9001, ISO 14001, TS 16949

Open the catalog to page 1
Through-Hole Resistors 2013 - 3

4 Metal Film Resistors 6 Metal Film Resistors 8 Metal Film Resistors 10 Metal Film Resistors 12 Metal Film Resistors 14 Metal Film Resistors 16 Metal Film Resistors 18 HID Lamp Resistors 20 Metal Oxide Film Resistors 22 Melf Metal Film Resistors 24 Melf Metal Film Resistors 26 Carbon Film Resistors 28 Carbon Film Resistors 30 Carbon Film Resistors 32 Carbon Film Resistors 34 Carbon Film Resistors 36 Melf Carbon Film Resistors 38 Melf Carbon Film Resistors 40 Metal Glazed Film Resistors 42 Pulse-Loading Resistors 44 Zero Ohm Resistors 45 Jumper Wires 46 Low Ohmic Wire Resistors 48 Wirewound...

Open the catalog to page 3
Through-Hole Resistors 2013 - 4

Through-hole resistors General Type Metal Film Resistors Normal & Miniature Style [ MFR Series ] FEATURES Power Rating Resistance Tolerance DERATING CURVE For resistors operated in ambient temperatures above 70°C, power rating must be derated in accordance with the curve below. INTRODUCTION The MFR Series Metal Film Resistors are manufactured using a vacuum sputtering system to deposit multiple layers of mixed metal alloys and passivative materials onto a carefully treated high grade ceramic substrate. After a helical groove has been cut in the resistive layer, tinned connecting leads of...

Open the catalog to page 4
Through-Hole Resistors 2013 - 5

ELECTRICAL CHARACTERISTICS Resistance Range I Q - 10MQ & 0Q for E24 & E96 series value Operating Temp. Range -55°C to +155°C Note: Special value is available on request ENVIRONMENTAL CHARACTERISTICS PERFORMANCE TEST Short Time Overload Voltage Proof on Insulation Temperature Coefficient Insulation Resistance Solvent Resistance of Marking Robustness ofTerminations Periodic-pulse Overload Damp Heat Steady State Temperature Cycling Resistance to Soldering Heat TEST METHOD 4.7 in V-block for 60 Sec, test voltage by type 4.16 Direct load for 10 Sec. in the direction of the terminal leads 4.39 4...

Open the catalog to page 5
Through-Hole Resistors 2013 - 6

Through-hole resistors Precision Type Metal Film Resistors Normal & Miniature Style [ MFP Series ] FEATURES Power Rating Resistance Tolerance DERATING CURVE For resistors operated in ambient temperatures above 70°C, power rating must be derated in accordance with the curve below. INTRODUCTION The MFP Series Metal Film Precision Resistors are manufactured using a vacuum sputtering system to deposit multiple layers of mixed metal alloys and passivative materials onto a carefully treated high grade ceramic substrate. After a helical groove has been cut in the resistive layer, tinned connecting...

Open the catalog to page 6
Through-Hole Resistors 2013 - 7

ELECTRICAL CHARACTERISTICS Voltage Proof on Insulation 300V 500V 700V 1,000V Resistance Range 10Q - I MQ for El92 series value Operating Temp. Range -55°C to +155°C Note: Special value is available on request ENVIRONMENTAL CHARACTERISTICS PERFORMANCE TEST Short Time Overload Voltage Proof on Insulation Temperature Coefficient Insulation Resistance Solvent Resistance of Marking Robustness ofTerminations Periodic-pulse Overload Damp Heat Steady State Temperature Cycling Resistance to Soldering Heat TEST METHOD 4.7 in V-block for 60 Sec, test voltage by type 4.16 Direct load for 10 Sec. in the...

Open the catalog to page 7
Through-Hole Resistors 2013 - 8

Through-hole resistors Professional Type Metal Film Resistors Miniature Style [ MF0 Series ] FEATURES Power Rating Resistance Tolerance DERATING CURVE For resistors operated in ambient temperatures above 70°C, power rating must be derated in accordance with the curve below. INTRODUCTION The MF0 Series Metal Film Professional Resistors are manufactured using a vacuum sputtering system to deposit multiple layers of mixed metal alloys and passivative materials onto a carefully treated high grade ceramic substrate. After a helical groove has been cut in the resistive layer, tinned connecting...

Open the catalog to page 8
Through-Hole Resistors 2013 - 9

ELECTRICAL CHARACTERISTICS Maximum Working Voltage 250V 350V Maximum Overload Voltage 500V 700V Voltage Proof on Insulation 300V 500V Resistance Range I Q - 10MQ & 0Q for E24 & E96 series value Operating Temp. Range -55°C to +155°C Note: Special value is available on request ENVIRONMENTAL CHARACTERISTICS PERFORMANCE TEST Short Time Overload Voltage Proof on Insulation Temperature Coefficient Insulation Resistance Solvent Resistance of Marking Robustness ofTerminations Periodic-pulse Overload Damp Heat Steady State Temperature Cycling Resistance to Soldering Heat TEST METHOD 4.7 in V-block...

Open the catalog to page 9
Through-Hole Resistors 2013 - 10

Through-hole resistors Flame-Proof Type Metal Film Resistors Normal & Miniature Style [ FMF Series ] FEATURES Power Rating Resistance Tolerance Flameproof Multi-layer Coating Meets Flameproof Feature Meets Overload Test DERATING CURVE The FMF Series Metal Film Flame-Proof Resistors are manufactured using a vacuum sputtering system to deposit multiple layers of mixed metal alloys and passivative materials onto a carefully treated high grade ceramic substrate. After a helical groove has been cut in the resistive layer, tinned connecting leads of electrolytic copper are welded to the end-caps....

Open the catalog to page 10
Through-Hole Resistors 2013 - 11

ELECTRICAL CHARACTERISTICS STYLE Maximum Working Voltage Maximum Overload Voltage Voltage Proof on Insulation Resistance Range Operating Temp. Range Temperature Coefficient Note: Special value is available on request ENVIRONMENTAL CHARACTERISTICS PERFORMANCE TEST TEST METHOD Short Time Overload Voltage Proof on Insulation in V-block for 60 Sec., test voltage by type Temperature Coefficient Insulation Resistance Solvent Resistance of Marking No deterioration of coatings and markings Direct load for 10 Sec. in the direction of the terminal leads Periodic-pulse Overload 4 times RCWV 10,000...

Open the catalog to page 11
Through-Hole Resistors 2013 - 12

Through-hole resistors Professional & Flame-Proof Type Metal Film Resistors Miniature Style [ FM0 Series ] FEATURES Power Rating Resistance Tolerance Flameproof Multi-layer Coating Meets Flameproof Feature Meets Overload Test DERATING CURVE The FM0 Series Metal Film Professional & Flame-Proof Resistors are manufactured using a vacuum sputtering system to deposit multiple layers of mixed metal alloys and passivative materials onto a carefully treated high grade ceramic substrate. After a helical groove has been cut in the resistive layer, tinned connecting leads of electrolytic copper are...

Open the catalog to page 12

All Yageo catalogs and technical brochures

  1. PU series

    9 Pages

  2. PT series

    9 Pages

  3. RL series

    9 Pages

  4. PE_L series

    12 Pages

  5. VRS series

    10 Pages

  6. SR series

    8 Pages

  7. RV series

    9 Pages

  8. YC/TC series

    12 Pages

  9. AF series

    9 Pages

  10. PA_E series

    10 Pages

  11. AT series

    9 Pages

  12. AA series

    10 Pages

  13. AC series

    12 Pages

  14. AF array

    8 Pages

  15. Inductors

    188 Pages

Archived catalogs