AF series - 9 Pages

Add to MyDirectIndustry favorites
AF series

Catalog excerpts

Innovative Service Around the Globe YAGEO DATA SHEET ANTI-SULFURATED CHIP RESISTORS AF series 5%, 1%, 0.5% sizes 0201/0402/0603/0805/1206/1210/1218/2010/2512 RoHS compliant & Halogen free

 Open the catalog to page 1

SCOPE This specification describes AF020I to AF25I2 chip resistors with anti-sulfuration capabilities. APPLICATIONS • Industrial Equipment • Power Application • Networking Application • High-end Computer & Multimedia Electronics in high sulfur environment • Automotive electronics FEATURES • AEC-Q200 qualified • Superior resistance against sulfur containing atmosphere • Halogen free product and production • RoHS compliant • Reduces environmentally hazardous waste • High component and equipment reliability • Saving of PCB space • Moisture sensitivity level: MSL 1 ORDERING INFORMATION ° GLOBAL...

 Open the catalog to page 2

E-24 series: 3 digits, ±5%, >10 Q First two digits for significant figure and 3rd digit for number of zeros E-24 series: 3 digits, ±1% One short bar under marking letter | IDC E-96 series: 3 digits, ±1% First two digits for E-96 marking rule and 3rd letter for number of zeros Both E-24 and E-96 series: 4 digits, ±I% First three digits for significant figure and 4th digit for number of zeros E-24 series: 3 digits, ±5% First two digits for significant figure and 3rd digit for number of zeros Both E-24 and E-96 series: 4 digits, ±I% First three digits for significant figure and 4th digit for...

 Open the catalog to page 3

Product specification Chip Resistor Surface Mount CONSTRUCTION The resistors are constructed on top of a high grade ceramic body. Internal metal electrodes are added at each end and connected by a resistive glaze. The resistive glaze is covered by a glass. The composition of the glaze is adjusted to give the approximate required resistance value and laser trimming of this resistive glaze achieves the value within tolerance. The whole element is covered by a protective overcoat. Size 0603 and bigger is marked with the resistance value on top. Finally, the two external terminations (Ni /...

 Open the catalog to page 4

ELECTRICAL CHARACTERISTICS Table 2 Operating Max. Max. Dielectric Temperature Working Overload Withstanding Range Voltage Voltage    Voltage Temperature Coefficient    Jumper of Resistance    Criteria Rated Current 2.0A 500 V    Max. Current io to 10M Zero Ohm Jumper < 0.050 ±5% (E24), io to iMn AF 1218    ± 0.5%, ±1% (E24/E96),

 Open the catalog to page 5

FOOTPRINT AND SOLDERING PROFILES For recommended footprint and soldering profiles of AF-series is the same as RC-series. Please see the special data sheet “Chip resistors mounting”. PACKING STYLE AND PACKAGING QUANTITY Table 3 Packing style and packaging quantity PACKING STYLE    REEL    AF0201    AF0402 AF0603/0805/    AF1210 AF1218/2010/ NOTE 1. For paper/embossed tape and reel specification/dimensions, please see the special data sheet “Chip resistors packing”. OPERATING TEMPERATURE RANGE POWER RATING pach type rated power at 70 °C: AF0201 = 1 /20W (0.05W) AF0402=I/I6 W (0.0625W) AF0603=...

 Open the catalog to page 6

TESTS AND REQUIREMENTS Table 4 Test condition, procedure and requirements TEST    TEST METHODPROCEDUREREQUIREMENTS Temperature Coefficient of Resistance (T.C.R.) IEC 60115-1 4.8    At +25/-55 °C and +25/+125 °C    Refer to table 2 Where t| =+25 °C or specified room temperature t2=-55 °C or + 125 °C test temperature R| =resistance at reference temperature in ohms R2=resistance at test temperature in ohms Life/EnduranceIEC 60115-1 4.25    At 70+2 °C for 1,000 hours, RCWV applied for +(l.0%+0.05 Q) MIL-STD-202 Method 108    1.5 hours on, 0.5 hour off, still-air required    < 100 mQ for Jumper...

 Open the catalog to page 7

TEST    TEST METHODPROCEDUREREQUIREMENTS Biased Humidity    M|L-STD-202 method 103    1,000 hours; 85C/85%R.H., 10% of operating    IQ<R<IMQ: ±(3%+0.05Q) Measurement at 24+4 hours after test conclusion. Solderability - Resistance toiec 60115-1 4.18 Soldering HeatMIL-STD-202 Method 215 Condition B, no pre-heat of samples Lead-free solder, 260+5 °C, 10+1 seconds immersion time Procedure 2 for SMD: devices fluxed and cleaned with isopropanol +(0.5%+0.05Q) for 0.5%, 1% tol. +(I.0%+0.05Q) for 5% tol. <50 mQfor Jumper No visible damage - Wetting    J-STD-002    Electrical test not...

 Open the catalog to page 8

Product specification Chip Resistor Surface Mount REVISION HISTORY REVISION CHANGE NOTIFICATION - Update test and requirement - Update Dielectric Withstanding Voltage& Resistance value - Modified test and requirements - Tests and requirement update - First issue of this specification “ Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products are unchanged. Any product change will be announced by PCN.”

 Open the catalog to page 9

All Yageo catalogs and technical brochures

  1. PU series

    9 Pages

  2. PT series

    9 Pages

  3. RL series

    9 Pages

  4. PA0201 series

    9 Pages

  5. PE_L series

    12 Pages

  6. VRS series

    10 Pages

  7. SR series

    8 Pages

  8. RV series

    9 Pages

  9. YC/TC series

    12 Pages

  10. PA_E series

    10 Pages

  11. AT series

    9 Pages

  12. AA series

    10 Pages

  13. AC series

    12 Pages

  14. AF array

    8 Pages

  15. Inductors

    188 Pages

Archived catalogs