PCM Series - XP Power - #1

Text version of the page

Specification 50/80/120 Watts • 4000 VAC Isloation • Low Leakage Current • Single, Dual and Triple Outputs • Worldwide Medical Approvals • CCC Approved (PCM80) • Both Line and Neutral Fused • Non-standard Connectors Available PCM Series Input Input Voltage • 90-264 VAC Input Frequency • 47-63 Hz Input Current • PCM50: 1.35 A max PCM80: 1.30 A max PCM120: 1.60 A max Inrush Current • 30 A at 115 VAC or 60 A at 230 VAC at 25 °C cold start Power Factor • PCM50: 0.55 typical PCM80/120: 0.94 min Earth Leakage Current • 180 ìA max at 132 VAC/60Hz 300 ìA max at 264 VAC/50Hz Output Output Voltage • See tables Minimum Load • No minimum load required for single output models. See tables for multi output models Start Up Delay • 2 s max Hold Up Time • 10 ms min at low line Line Regulation • ±1% max at full load for ±10% change in input Load Regulation • ±5% max Transient Response • 5% max. deviation, 500 ìs recovery time for a 50% load change Ripple & Noise • 2% pk-pk, 20MHz BW Overvoltage Protection • 112-132% with auto recovery on V1 Overcurrent Protection • 110-200% with auto recovery on all outputs Temperature • ±0.05% /°C Coefficient xppower.com General Efficiency • Single output models: 80% typical Multi output models: 75% typical Isolation • 4000 VAC Input to Output 1500 VAC Input to Ground 500 VAC Output to Ground Switching Frequency • PCM50: 64 kHz typical PCM80: 55 kHz typical PCM120: 120 kHz typical MTBF • 100 kHrs at full load and 25 °C ambient per MIL-HDBK-217F Environmental Operating Temperature • PCM50: 0 °C to +70 °C, derate from 100% load at 50 °C to 50% load at +70 °C PCM80: 0 °C to +70 °C, derate from 100% load at 40 °C to 50% load at +70 °C PCM120: 0 °C to +60 °C, derate from 100% load at 40 °C to 50% load at +60 °C Storage Temperature • PCM50/80: -40 °C to +80 °C PCM120: -20 °C to +85 °C EMC & Safety Emissions • EN55022, level B conducted EN55022, level B radiated Harmonic Currents • EN61000-3-2, class A Voltage Flicker • EN61000-3-3 amendments 1 & 2 ESD Immunity • IEC61000-4-2, level 3 Perf Criteria B Radiated Immunity • IEC61000-4-3 10 V/m, level 3 Perf Criteria B EFT/Burst • IEC61000-4-4, level 3 Perf Criteria B Surge • IEC61000-4-5, level 3 Perf Criteria B Conducted Immunity • IEC61000-4-6 10 V/m, level 3 Perf Criteria B Power Frequency • IEC61000-4-8 10 A/m, Perf Criteria B Magnetic Fields Dips & Interruptions • IEC61000-4-11, 30% 500 ms, 60% 100 ms, 100 % 5000 ms Perf Criteria A, A, C Safety Approvals • UL60601-1, CSA C22.2 No. 601.1 per cUL EN60601-1, CCC (PCM80) AC-DC