Hand-held Portable Metal Hardness Tester - Xian Henry Automation - #1

- Crank-shafts, cylinder blocks etc.

- Material identification etc. Technical Specifications

- Accuracy:+/-0.8%

- Self diagnosis and bias correction

- RS232 to computer for data management

- Direct reading in units: Rockwell C HRC 17.0-68.0, Rockwell B HRB 13.5-100, Brinell HB 30-680, Vickers HV 80-999, Shore HS 5.0-99.9, Leeb HL 180-960

- Auto conversion to U.T.S., ob (370-2600 MPa)

- Auto memory of 500 groups of data with 7 test points per each group

- Auto display of statistical mean value, number of readings, time

- Large dot matrix LCD display with backlight

- Test block with factory certificate traceable to national standard

- Power: two of 1.5V cells, for 30h non-stop work

- Operating temperature 0-40 deg. C

- Standard internal probe D for general purpose

- Optional external probes, simple plug-in use, for different surface profiles: G for coarse surface like casting or forged piece, C for light, thin piece or hardened layer, DL & DL+15 for groove or tooth face, DC for confined place

- Weight: 250 g (1.2 lb.); Sizes: 165x68x30mm

- Carry case aluminum surface 325x240x115 mm -Export worthy carton package 365x290x145mm

- Supporting rack optional

- Shipping weight of standard kit about 5.2 kg

Model HRH-2100 (order code HLJ2100) is an advanced hand-held hardness tester distinguished by its high accuracy, wide measuring range, and simplicity of operation. It is suitable for testing hardness on various conditions and environments. Principle

It is rebound principle unaffected by gravity (automatic correction) based on a spring loaded impact body which is propelled against a test piece. The forward velocity is measured and compared to the reverse velocity after rebound. Features

- Non-destructive hardness tester

- Compact and light weighted for portable use

- For any direction, even up side down

- Wide ranges for any metal materials

- For work-pieces, assemblies and raw stock

- Reliability proven for 20 years in market

- Easy-to-use for even in-experienced

- CE approval mark for European market Applications

Widely used in mechanical, metallurgy, automobile, petrochemical, airplane & space, energy, and pressure vessel industries etc. Testing for machines, structures, and materials in production lines for quality checking, on spots for difficult to be moved or difficult to be accessed, and in confined position even upside down, such as

- Fabricated component of a machine

- Mould surface of a die

- Pressure vessel or turbo generator set analysis

Address: 703, Yingda Dasha, No.60 Xiguan Zhengjie, Xian 710082, China Tel:+86-29-8669 8566 Fax:+86-29-8823 1257 http://www.henryautomation.com Email:export@henryautornationxom