XEBEC Brush™ Surface - 7 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

Catalogue excerpts

CNC deburring solutions with XEBEC innovative ceramic fiber tools

 Open the catalogue to page 1

brushes are made from a material like none other! Unmatched grinding force and cutting power! Achieve outstanding performance with Xebec deburring tools manufactured with our revolutionary technology using ceramic fibers. One bristle has 1,000 cutting edges. Each bristle is made by fixing 500 - 1,000 ceramic fibers, each together with a binder.The tips of each of these fibers, a few dozen microns in diameter, form the cutting edges.Continuous cutting edges provide stable and consis- tent grinding performance. 7^ Overpowering cutting edges The high grinding power exhibited by thousands of cutting...

 Open the catalogue to page 2

strength 1 Overpowering grinding force Free of abrasive grains. The fiber content Our uniquely developed ceramic fibers themselves are the abrasives; their fiber content ratio Is over 80%. The thousands of cutting edges that are made up of the ends of each Individual fiber create overpowering grinding power. Abrasive content Comparison of grinding capacity with other companies' products Handles all sorts of materials up to HRC 65. The brushes can process general materials up to HRC 65. They can handle hard-to-cut and superhard materials from general metals, aluminum, and resin, to SUS, Inconel,...

 Open the catalogue to page 3

XEBEC brushes are tools that allow »Automation with XEBEC Brush™ polishing with machining centers Intended Machine Tool robots, and specialized machines. XEBEC brushes can, after being mounted to the dedicated sleeve, be attached to machinery with a standard collet chuck, milling chuck, drill chuck, etc. •Machining centers •Specialized machines Robots •Drilling machines After mounting on NC machine tools such as above, use with the recommended processing conditions Mount the brush to the sleeve and firmly affix it with the attached screw. After affixing, just mount it to the MC or robot's collet...

 Open the catalogue to page 4

» Product Lineup XEBEC Brush™ Product Lineup fESSSt XEBEC Brush™ Surface (CUD tvDe)<06~01OO IXEBEC Brush™ Kit is recommended to periodically carry out maintenance. ^Maximum rotation speed conforms to the instruction manual for XEBEC Brush™ Surface. usThe maximum rotation speed for this product as a standalone unit is 5,000 min-1. *lf the tool length is problematic, we have a specialty short-length BT holder (tooling). soThe spring load can be adjusted within 2N to 6N for 0 mm strokes,

 Open the catalogue to page 5

ssThis is not designed for <t>6mm brush. Sleeve rests Brush rest XEBEC Brush™ Surface XEBEC Floating Holder™ [Maximum Rotation Speed] 4>3 pink brush: Use at or below 6000min Usage over the maximum rotation speed is dangerous and may result in [Depth of Cut, Grinding Load] Usage under excessive depth of cut or grind load may not result in the desired results, as well as shortened brush life caused by pronounced wear and breakage of the fine ceramic fiber rods. Processing is the most effective using the tips of the ceramic fiber rod. 1.5mm.Depth of cut should not be exceeding 1mm when polishing...

 Open the catalogue to page 6

TECHNOLOGY CO.,LTD. XEBEC TECHNOLOGY CO.,LTD. ADD. 1-7-25, Koujimachi, Chiyoda-ku, Tokyo, 102-0083, Japan E-mail info@xebec-tech.com ©COPYRIGHT 2014 XEBEC TECNOLOGY. ALL RIGHTS RESERVED. Your Order

 Open the catalogue to page 7

All XEBEC TECHNOLOGY catalogues and technical brochures

  1. Xebec Diamond

    4 Pages

    En