XEBEC Brush™ Crosshole - 7 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

Catalogue excerpts

Crosshole Deburring Tools Product Catalog CNC deburring solutions with XEBEC innovative ceramic fiber tools

 Open the catalogue to page 1

One bristle has 1,000 cutting edges. Each bristle is made by fixing 500 - 1,000 ceramic fibers, each together with a binder. The tips of each of these fibers, a few dozen microns in diameter, form the cutting edges. Continuous cutting edges provide stable and consistent grinding performance. » 3 Features of XEBEC Brush Overpowering grinding force The high grinding power exhibited by thousands of cutting surfaces reliably removes burrs. Cutting edges that keep cutting The self-sharpening fiber structure works to the very end without losing grinding power. The brushes, made of a high-density fiber...

 Open the catalogue to page 2

strength J Overpowering grinding force Free of abrasive grains. The fiber content Our uniquely developed ceramic fibers themselves are the abrasives; their fiber content ratio is over 80%.The thousands of cutting edges that are made up of the ends of each individual fiber create overpowering grinding power. Abrasive content Rotation speed Reduced work(g) iacity with other companies' products Nylon impregnal XEBEC Brush Nylon impregnated brush •XEBEC Brush™ Surface/ Grinding aprox.0.22g in 10 sec •Nylon brush/ Not grinding •Brass brush/ Not grinding The brushes can process general materials up...

 Open the catalogue to page 3

» Automation with XEBEC Brush™ XEBEC Brush™ are tools that allow polishing with machining centers, robots, and specialized machines. Intended Machine Tool XEBEC Brush™ can be attached to machinery with a standard collet chuck, milling chuck, drill chuck, etc. Attach to an NC machine that meets the requirements below and use under the following recommended processing conditions. 9 Machining center capable of 8000 min1 or higher # Electric rotating tool with adjustable speed * Cannot be used on lathes without rotating tools or air rotary tools whose speed cannot be adjusted. The grinding force is...

 Open the catalogue to page 4

» Product Lineup XEBEC Brush™ Crosshole (standard) Lineup ' We offer special orders of *1.5 mm brushes. Please contact us for details. XEBEC Brush™ Crosshole Extra-Long Shank(Custom order only) [Target primary processing hole] 05~02Omm [Target depth] 140mm (and more) ~400mm * Please contact us for cross-hole deburring of depth more than 400mm TECHNOLOGY CO.,LTD. » XEBEC Stone™ Flexible Shaft (The XEBEC Stone™ uses the same proprietary structure as XEBEC Meister Finish. It exposes a large number of cutting edges on the entire surface, resulting in exceptional grinding force. I The self-sharpening...

 Open the catalogue to page 5

Successful Automated Applications For T-shaped holes: If the diameter of the secondary processing hole is more than 100% of the diameter of the primary processing hole. (For example, if the primary hole is ip10 mm and the secondary hole processing hole processing hole For cross-shaped holes: If the diameter of the secondary processing hole is more than 70% of the diameter of the primary processing hole. (For example, if the primary hole is cp 10 mm and the secondary hole processing hole processing hole XEBEC Stone™ Flexible Shaft [Maximum rotation speed] Maximum rotation to each head size is as...

 Open the catalogue to page 6

TECHNOLOGY CO.,LTD. XEBEC TECHNOLOGY CO.,LTD. ADD. 1-7-25, Koujimachi, Chiyoda-ku, Tokyo, 102-0083, Japan E-mail info@xebec-tech.com ©COPYRIGHT 2014 XEBEC TECNOLOGY. ALL RIGHTS RESERVED. Your Order

 Open the catalogue to page 7

All XEBEC TECHNOLOGY catalogues and technical brochures

  1. Xebec Diamond

    4 Pages

    En