XEBEC Back Burr Cutter and Path - 6 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

Catalogue excerpts

The reliable CNC back deburring tool with innovative path data XEBEC Path XEBEC Back Burr Cutter Faster operating time thanks to the unique cutter design Feature] Uniform edge shape by consistent deburring amoui Feature2Long tool life by using the entirety of the cutting blade

 Open the catalogue to page 1

Applicable Areas Four edges are processed in one approach Up to the ratio between the primary and secondary hole is 1:1 Planar hole Off-center hole Features of XEBEC Back Burr Cutter and Path ■ XEBEC Path ●Uniform edge shape Stainless Steel ●Faster ●Long by consistent deburring amount operating time thanks to the unique cutter design tool life by using the entirety of the cutting blade ■ XEBEC Back Burr Cutter ●Micro-grain cemented carbide: Sharp and long lasting ●Highly heat-resistant AlTiCrN coating: Support materials from non-ferrous (e.g. aluminum)  to difficult-to-cut materials (e.g. titanium...

 Open the catalogue to page 2

[Regular type(XC-QQ-A)] [Straight type(XC-QQ-B)] Product Code 1. This cutter is an exclusive tool for NC machines. Never use it as a hand tool because the cutter may break and cause an injury. 2. Processing with a cutter with the wrong size may cause breakage of the product, tools, or machinery. Make sure to verify the dimensions before use. 3. Make sure that the run-out of the cutting edge is less than 0.01mm before starting processing. 1. The spindle speed and table feed are rough standards for initial processing. 2. If an abnormal vibration or noise occurs, or the spindle speed and/or table...

 Open the catalogue to page 3

XEBEC Back Burr Cutter and Path Order Code Request Sheet (Type B : For Inner Diameter Upper and Lower Edges) This sheet is used to confirm the dimensions of deburring areas and to confirm whether or not point group data (Name : XEBEC Path for Back Burr Cutter) can be generated. If a path can be generated then the path order code and optimal cutter diameter will be notified to a customer. This sheet is for edges on the inner diameter of the orthogonal crossholes. Make sure that the sheet type matches the locations that burrs will be removed. Type B Inner Diameter Upper/Lower Edges [Restrictions...

 Open the catalogue to page 4

Combined Lathe (XZY axis) (Type BY :Inner Diameter Upper/Lower Edges) XEBEC Back Burr Cutter and Path Order Code (lbp-02') -^2SSi& This sheet is used to confirm the dimensions of deburring areas and to confirm whether or not point group data (Name : XEBEC Path for Back Burr Cutter) can be generated. If a path can be generated then the path order code and optimal cutter diameter will be notified to a customer. l.Deburring Location :Burr location :Cutter direction This sheet is for edges on an orthogonal crosshole, being processed with a 3-axis simultaneous combined lathe (XZY-axis). Make sure that...

 Open the catalogue to page 5

XEBEC Path for Back Burr Cutter Corresponding Chart  Machine Type    Deburring Location           ■ Type A: Outer Diameter Upper and Lower Edges Order Code Request Sheet :Burr location :Cutter direction 3-Axis Simultaneous Control Machining Center (XYZ axis) ■ Type B: Inner Diameter Upper and Lower Edges :Burr location :Cutter direction ■ Type C: Planar Hole Front and Back Edges :Burr location :Cutter direction ■ Type AY: Outer Diameter Upper and Lower Edges 3-Axis Simultaneous Combined Lathe (XZY axis) :Burr location :Cutter direction ■ Type BY: Inner Diameter Upper and Lower Edges :Burr location...

 Open the catalogue to page 6

All XEBEC TECHNOLOGY catalogues and technical brochures

  1. Xebec Diamond

    4 Pages

    En