| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | | | |
| | | ISO9001 Certified | | |
| | | |
| | | XEBEC products are manufactured in a plant certified by ISO 9001 the international standard of quality control and assurance i® | | |
| | | |
| | | | |
| | For XEBEC Cutting Fiber | | |
| | | Patent Pending | | |
| | | |
| | | |
| | | "31 | | |
| | | |
| | | For consistently higher quality, simpler process control and longer tool life! | | |
| | | |
| | | OThe tool holder floats by the action of the spring inside the holder, thus assuring stable processing under load control. w> Vary the cutting load just by changing the spring in terms of the desired processing quality. | | |
| | | |
| | | \J Delivers stable edge quality by adjusting for changes in cutting amount due to tool wear. ^ Prolongs time to compensate for cutting depth under tool wear and amount of fiber rod protrusion. s> Reduces the amount of tool wear so as to stabilize processing conditions. | | |
| | | |
| | | Multitasking Machine | | |
| | | |
| | | Comparison of edge finishing with and without XEBEC Floating Holder. | | |
| | | |
| | | Without floating holder The change in cutting depth is directly reflected in the finished condition. | | |
| | | With floating holder Change in cutting depth is absorbed by the floating function. Stable finishing assured even when cutting depth varies greatly. | | |
| | | |
| | | |
| | | til | | |
| | | Cutting depth: 5.0 mm | | |
| | | |
| | | |
| | | (Stanivi | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |