High Temperature Heat Flux Sensors (Thermal Flow) For Industry, Laboratory and Resarch - WUNTRONIC - #1

Text version of the page

Mess-, Steuer- und Regelgeräte GmbH Copyright© 2009 WUNTRONIC GmbH. All Rights Reserved Heppstrasse 30 D - 80995 München Tel. +49 (89) 313 30 07 Fax +49 (89) 314 67 06 http://www.wuntronic.de e-mail: WUNTRONIC@wuntronic.de High Temperature Heat Flux Sensors (Thermal Flow) For Industry, Laboratory and Resarch Series FCR These high temperature Heat Flow Sensors are constructed from high temperature materials as ceramics and enclosed for extra ruggedness in a Stainless Steel housing. They are designed to accurately measure, record and/or control heat flow in adverse environments such as kiln walls, furnace tubes, nuclear generators and the like. In operation, the sensor attached to the surface or be an integral of the wall though which the Heat Flow is to be recorded. Its self generated EMF (millivolts) is directly proportional to the Heat Flow passing through it. Model with an Integrated Thermocouple Type K are designed to measure both heat flux and temperature. Sensitivity, nominal: ........................... 180 BTU/ft2Hr/mV. or 560 (W/m2)/mV Impedance, nominal:...................................................................... 50 Ohms Heat Flux Range: ............................... 30000 BTU/ft2 Hr. or 94500 W/m2 °K Thermal Conductivity: ............................ 0.55 BTU/ft Hr. °F or 0,95 W/m °K Accuracy:............................................................................................. ±5% Calibration: ...................................... Each unit is supplied with a Sensitivity Constant traceable to NIST. Extra Cable length possible for: ...................Metal sleeve (K included, TFE, TFE and K „hƒn Industrial „hƒn High Temperature Insulation evaluation. „hƒn Submarines and Vessels „hƒn Test for Firefighter equipment „hƒn Pipes and Ducts „hƒn Refineries and Reactors „hƒn Aero-Space „hƒn Direct Heat Flux Readout „hƒn For Temperatures up to 1000°F or +549°C „hƒn With Thermocouple Option available „hƒn Self-generating output - requires no Amplifier nor Power Supply or Reference Junction „hƒn Each unit is supplied with a Sensitivity Constant traceable to NIST Features: Specifications: Description: Applications: 0.14” or 3,6 mm 3 ft Thermocouple 0.625” or 15,9 mm a)1“ Pig Tails, 22 AWG b) 3 ft TFE Cable c) Metal Sleeve Model without Thermocouple with Thermocouple Type "K" FCR-200 FCR-200-M FCR-200-C FCR-200-K FCR-200-M-K FCR-200-C-K Order number C01-600-100 C01-600-110 C01-600-120 C01-600-200 C01-600-210 C01-600-220 Cable Pig Tail Metal Sleeve TFE (Teflon) Pig Tail Metal Sleeve TFE (Teflon) Cable Length 3" (76 mm) 3 ft (1m) 3 ft (1m) 3" (76 mm) 3 ft (1m) 3 ft (1m) Max Temperature 1000°F (549°C) 1000°F (549°C) 500°F (260°C) 1000°F (549°C) 1000°F (549°C) 500°F (260°C)