Fluxmeter - WUNTRONIC - #1

/ 2


catalogue search
Fluxmeter - WUNTRONIC
P. 01
Fluxmeter - WUNTRONIC
P. 02
Pages:
Fluxmeter - WUNTRONIC


See other catalogues for WUNTRONIC

Text version of the page
http://www.wuntronic.com e-mail: WUNTRONIC@wuntronic.de Mess-, Steuer- und Regelgeräte GmbH

Fluxmeter - 58481 Microprocessor-Controlled Integrating Fluxmeter

Model MF-10D

Functionally and Technically the Best Fluxmeter in its Class

Features:

16 Key Sealed Membrane Keypad Superior Stability LocLogic Auto Null Microprocessor Controlled Display Resolution to 5¾ digits
The MF-10D Integrating Fluxmeter is a precision electronic instrument designed to measure the mag-netic flux coupling within a coil or loop of wire. Aver-age flux density thru the area of a coil, or the total flux within a coil can be measured and displayed. The large keypad makes it easy to select functions and setup parameters. The instrument can store up to 10 sets of coil parameters to simplify instrument set up. The MF-10D Fluxmeter uses the latest in integrator amplifier designs to accurately integrate volt-second signals from flux measurement coils. The exclusive Storage of 10 sets of Measurement Coil Pa-rameters USB, RS-232 and IEEE-488 Interfaces Can be remotely operated by PC Corrected and Uncorrected Analog Outputs Peak Hold
LocLogic Auto Null feature automatically removes uncompensated thermocouple voltages to minimize integrator drift without compromising measurement sensitivity. Measurement range and scale sensitivity are easily selected via easy to read display menus. The broad range of features and fast response makes this Fluxmeter suitable for DC and AC Hys-teresis loop tracing. In the DC mode the MF-10D Fluxmeter provides accurate measurement of static and slowly changing fields. AC measurements are represented in true RMS from 5 Hz to 100 kHz. The bright, easy to read, vacuum florescent display has four lines of 20 alphanumeric characters, and is readable from any viewing angle. User control and selection of the displayed data, measurement type and system status makes this instrument easy to use and set up. Corrected and uncorrected analog outputs, plus Hi, Lo, Inside/Outside Threshold Alarms Bright 4-Line Vacuum Fluorescent Display

Applications:

USB, IEEE-488.2, and RS-232 inter-faces, allow flexibility in interfacing to other equip-ment. AC and DC Magnetic Field Measurements Magnetic Circuit Analysis - Relays, Electro-magnets, Motors, Generators, Loudspeakers, Linear Actuators Measure Residual Fields Measure Stray Magnetic Fields Measure Absolute and Differential Magnetic
Copyright© 2009 WUNTRONIC GmbH. All Rights Reserved Heppstrasse 30 D - 80995 München Phone +49 (89) 313 30 07 Fax +49 (89) 314 67 06

pageCatalog pdf di En 2012-05-22-30