PORTABLE LIGHTING

LOW VOLTAGE WORKSTATION Woodhead step-down transformers convert 120V power to 12V power for use in wet locations with 12V tools and lights. Low-voltage workstations are exceptionally durable, easy to handle and service and capable of long continuous operation in some of industry’s most demanding environments. To protect workers and comply with OSHA, the transformers must be kept out of the wet location as 120V primary voltage should not be located in such areas. Circuit breakers located on the low volt-age workstation provide 15 amp protection. BEST SELLERS!

4 Outlet Workstation •Non-NEMA crowfoot receptacles• 400W maximum

part no. 1640-12 (shown)

2 Outlet Workstation •Non-NEMA crowfoot receptacles• 200W maximum

part no. 1642-12

Low Voltage Workstation

FIXTURE VOLTAGEMAX.CORD NEMACORDPARTNO.PRIM.SEC.LAMP WATT.OUTLETSTYPECONFIGURATIONLENGTH 1640-12 120V/60HZ12VAC400W4 60W07 NON-NEMA CROWFOOT16/3 SOOWNEMA 5-156' 1642-12 120V/60HZ12VAC200W2 60W07 NON-NEMA CROWFOOT16/3 SOOWNEMA 5-156' 1641-12
2 120V/60HZ12VAC 400W1 69W08 NON-NEMA LOCKING16/3 SOOWNEMA 5-1510' 1644-12
1 120V/60HZ12VAC200W2 60W07 NON-NEMA CROWFOOT16/3 SOOWNEMA 5-156' 1643-12
1 120V/60HZ12VAC400W4 60W07 NON-NEMA CROWFOOT16/3 SOOWNEMA 5-156'
1 FOR USE WITH NO.8500 HALOGEN WIDE AREA LIGHT,10 AMP INDUSTRIAL CIRCUIT BREAKER PROTECTION 2 FOR USE WITH NO.321637 STRINGLIGHT,30 AMP CIRCUIT BREAKER PROTECTION MOST WOODHEAD PRODUCTS HAVE U.L.AND/OR CSA APPROVALS.FOR A LISTING OF APPROVALS BY PART NUMBER,SEE PAGES 262-269. www.woodhead.com WOODHEAD 13