CABLE GRIPS

PULLING GRIPS Multi-Weave Multi-weave pulling grips are constructed of high strength galvanizedsteel and are designed for pulling aluminum or copper bare conductor, wire rope and insulated cables. These grips are used in applications such as distribution line stringing and overhead transmission. Multi-weave pulling grips are available with a flexible and rotating eye, which can be attached to a swivel.

Multi-Weave,Flexible Eye

Multi-Weave, Rotating Eye The forged steel rotating eye will thread through sheaves and blocks without binding,but is not a swivel and will not turn under tension. The rotating eye can turn to relievepulling torque when tension is relaxed.

CABLE DIAMETERMESHEYECOLORAPPROXIMATERANGEPART NO.LENGTHDIAMETERCODEBREAK STRENGTH
1 0.250-0.490" 36620 26"7/8"DK GREEN6,800 LBS.0.500-0.740" 36621 32"1"BROWN10,000 LBS.0.750-0.990" 36622 41"1"LT BLUE14,400 LBS.1.000-1.240" 36623 52"1-3/8"GOLD24,600 LBS.1.250-1.490" 36624 56"1-5/8"BLACK30,600 LBS.1.500-1.740" 36625 60"1-7/8"RED30,600 LBS.1.750-2.240" 36626 70"1-7/8"DK BLUE48,000 LBS.2.000-2.490" 36627 50"1-7/8"YELLOW48,000 LBS.2.500-2.990" 36628 52"1-7/8"ORANGE48,000 LBS.3.000-3.490" 36629 54"1-7/8"ALUM"UM48,000 LBS.3.500-3.990" 36630 56"1-7/8"LT GREEN48,000 LBS.

Multi-Weave, Flexible Eye

CABLE DIAMETERMESHEYECOLORAPPROXIMATERANGEPART NO.LENGTHDIAMETERCODEBREAK STRENGTH
1 0.250-0.490" 36640 26"1/4"DK GREEN6,800 LBS.0.500-0.740" 36641 32"5/16"BROWN10,000 LBS.0.750-0.990" 36642 41"3/8"LT BLUE14,400 LBS.1.000-1.240" 36643 52"1/2"GOLD24,600 LBS.1.250-1.490" 36644 56"1/2"BLACK30,600 LBS.1.500-1.740" 36645 60"1/2"RED30,600 LBS.1.750-2.240" 36646 70"5/8"DK BLUE48,000 LBS.2.000-2.490" 36647 50"5/8"YELLOW48,000 LBS.2.500-2.990" 36648 52"5/8"ORANGE48,000 LBS.3.000-3.490" 36649 54"5/8"ALUMINUM48,000 LBS.3.500-3.990" 36650 56"5/8"LT GREEN48,000 LBS.
1 TO DETERMINE WORKLOAD SAFETY FACTOR,DIVIDE APPROXIMATE BREAK STRENGTH BY 5.SEE PAGE 187 FOR STRENGTH INFORMATION.NOTE:IT IS RECOMMENDED THATA SWIVEL BE USED FOR RELEASE OF TORQUE DURING A PULL.USE A CONNECTING LINK WHEN A SWIVEL IS NOT NEEDED.DO NOT RUN GRIPS OR SWIVELS OVER BULLWHEELS WHILE UNDER TENSION.DO NOT USE MULTI-WEAVE FOR PULLING ROPE.WHEN HIGHER LOADS AREREQUIRED,USE WOODHEAD’S HIGH STRENGTH-STYLE PULLING GRIPS.SEE INSTALLATION INSTRUCTIONS SUPPLIED WITH GRIP FOR RECOMMENDEDSWIVELS,LINKS AND MANUFACTURERS OF CLAMPS OR ACCESSORIES LISTING. MOST WOODHEAD PRODUCTS HAVE U.L.AND/OR CSA APPROVALS.FOR A LISTING OF APPROVALS BY PART NUMBER,SEE PAGES 262-269. www.woodhead.com WOODHEAD 179