Compressed Air Treatment - WILKERSON - #19

Text version of the page

Untitled table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:6.00pt "Arial", sans-serif; } .font1 { font:7.00pt "Arial", sans-serif; } .font2 { font:8.00pt "Arial", sans-serif; } .font3 { font:9.00pt "Arial", sans-serif; } .font4 { font:13.00pt "Arial", sans-serif; } .font5 { font:17.00pt "Arial", sans-serif; } .font6 { font:25.00pt "Arial", sans-serif; } Catalog 9EM-TK-190-2 Compressed Air Systems Type B Filter Element Spécifications Type C Filter Element Specifications Type D Filter Element Specifications A Efficiency 99.97% when tested with 0.3 micron aerosol DOP test Federal Standard 209B. Compatible with mineral and synthetic oils. Residual Oil 0.5 ppm / wt (inlet temperature / pressure 70°f / 100 PSIG) when analyzed using infra red spectrophotometry based on the Pneurop 6611 procedure. Air Quality Class * Conforms to ISO 8573 Class 3 or better Flow Inside to outside Filter Media Resin impregnated borosilicate glass microfiber Support Structure Inner 304 Stainless Steel support cylinder with outer polymeric sleeve. End Caps Glass filled polyamide material Initial Differential Pressure Dry — 1.5 PSID Initial Differential Pressure Wet — 2.5 PSID Flow range — 5 to 4800 SCFM @ 100 PSIG Application Installations as a coalescing prefilter for general purpose protection or as a prefilter to a high efficiency coalescer. Efficiency 99.99998% when testing with 0.3 micron aerosol on dioctyl phylate (DOP) test according to Federal Standard 209B. Compatible with mineral and synthetic oils. Residual Oil 0.01 ppm / wt (inlet temperature / pressure 70°f / 100 PSIG) when analyzed using infra red spectrophotometry based on the Pneurop 6611 procedure. Air Quality Class * Conforms to ISO 8573, better than Class 1 Flow Inside to outside Filter Media Pure borosilicate glass microfiber with a mean strand diameter of 0.5 micron and a voids volume of 96%. Contains no glues or resins. Support Structure Inner and outer 304 Stainless Steel support cylinders. End Caps Glass filled polyamide material Initial Differential Pressure Dry — 1.25 PSID Initial Differential Pressure Wet — 2.25 PSID Flow range — 5 to 4800 SCFM Application Install where highest quality air is required; typically instrumentation, process air, pneumatic gauging, paint spraying, etc. * "M" Series Coalescing Filters, with Type "C" 0.01 micron elements: All Wilkerson Type "M" Oil Removal (Coalescing) Filters with Type "C" 0.01 micron elements exceed ISO Class 1 for maximum particle size and concentration of solid contaminants, and exceed Class 1 on maximum oil content (ppm / wt).5 Efficiency Less than 0.003 ppm / wt maximum remaining oil content (inlet temperature / pressure of 70°F / 100 PSIG) when analyzed using infra red spectrophotometry based on the Pneurop 6611 procedure; removal of hydrocarbon vapors and odors. Air Quality Class * Conforms to ISO 8573, better than Class 1 Flow Inside to outside Filter Media Snow storm filled activated carbon for optimum packing density and life. Support Structure Model M03 - M28: Clear plastic housing with molded plastic end cap. Integral outlet filter. Model M30 - M45: Inner and outer 304 Stainless Steel support sleeve cylinders End Caps Glass filled polyamide material Initial Differential Pressure Dry — M30 - M31: 3 PSID M32 - M45: 1 PSID Flow range — 5 to 4800 SCFM Application Installation after high efficiency coalescer for process air purification, odor removal, removal of trace vapors and for critical applications. * "M" Series Absorption Filters, with Type "D" activated carbon elements: All Wilkerson Type "M" Absorption Filters with Type "D" activated carbon elements exceed ISO Class 1 on maximum oil content (ppm / wt).5 Appearance White polymeric outer sleeve with black end caps. * "M" Series Coalescing Filters, with Type "B" 0.5 micron elements: All Wilkerson Type "M" Oil Removal (Coalescing) Filters with Type "B" 0.5 micron elements exceed ISO Class 2 for maximum particle size and concentration of solid contaminants, and exceed Class 3 on maximum oil content (ppm / wt).5 wilkerson A17 Pneumatic Division Richland, Michigan www.wilkersoncorp.com