Dual fuel burner sizes 30 to 70 vers NR - Weishaupt - #9

Text version of the page

9 Dual fuel burner selection Types GL, RGL and RGMS30, NR version 14 12 10 8 6 4 2 0 -2 [kW] 0 500 1000 1500 2000 [kg/h] EL0 50 100 150 200 [kg/h] S0 50 100 150 200 2500 [ mbar ] Burner type RGL30/2-A, vers. ZM-NR RGMS30/2-A, vers. ZM-NR Combustion head type G30/2-NR 190x65 G30/2-NR 190x65 Rating kW Nat. Gas/LPG 300 – 2300 300 – 2300 Rating kg/h Light oil EL 40 – 193 – Heavy oil S – 60 – 205 12 10 8 6 4 2 0 -2 [kW] 0 500 1000 1500 2000 [kg/h] EL0 50 100 150 200 2500 [ mbar ] Burner type GL30/2-A, vers. ZM-NR GL30/2-A, vers. TM-NR Combustion head type G30/2-NR 190x65 Rating kW Nat. Gas/LPG 300 – 2300 Rating kg/h Light oil EL 40 – 193 Comb. head open Comb. head closed Gas/LPG LPG Nat. Gas Gas/LPG Light oil Light oil Light oil Heavy oil Burner type Version DIN CERTCO No. Valve train Order No. Type test No. DN / BSP GL30/2-A ZM-NR CE-0085-AP 0528 R 1 1/2” 218 303 13 5G310/99 M R 2” 218 303 15 DN 40 218 303 22 DN 50 218 303 32 DN 65 218 303 42 DN 80 218 303 52 DN 100 218 303 62 DN 125 218 303 72 GL30/2-A TM-NR CE-0085-AP 0528 R 1 1/2” 218 309 13 5G310/99 M R 2” 218 309 15 DN 40 218 309 22 DN 50 218 309 32 DN 65 218 309 42 DN 80 218 309 52 DN 100 218 309 62 DN 125 218 309 72 RGL30/2-A ZM-NR CE-0085-AP 0528 R 1 1/2” 218 305 13 5G311/99 M R 2” 218 305 15 DN 40 218 305 22 DN 50 218 305 32 DN 65 218 305 42 DN 80 218 305 52 DN 100 218 305 62 DN 125 218 305 72 RGMS30/2-A ZM-NR CE-0085-AP 0528 R 1 1/2” 219 305 13 – R 2” 219 305 15 DN 40 219 305 22 DN 50 219 305 32 DN 65 219 305 42 DN 80 219 305 52 DN 100 219 305 62 DN 125 219 305 72 The ratings given are based on an air temperature of 20°C and an installation altitude of 500 m. The stated oil throughputs refer to a calorific value of 11.91 kWh/kg for light oil EL and 11.24 kWh/kg for medium/heavy oil S Turndown of dual fuel burners firing on oil Dual fuel burners with regulating nozzles have a maximum turndown ratio on oil of 1:3. It should be ensured that the lower operating point also lies within the burner’s capacity graph Voltages and frequencies: As standard, the burners are suitable for three phase alternating current 400 V, 3 ~, 50 Hz. Other voltages and frequencies available on request at no extra cost. Standard burner motor: Isolation class F, IP 54 protection