SR & Intelligent Digital (CAN) sensors and accessories for use with HPM Series
4Pages

SR & Intelligent Digital (CAN) sensors and accessories for use with HPM Series Up to l 750 lpm, 200 US gpm flow measurement l 1000 bar, 14500 psi pressure measurement Wide range of cables and accessories All Intelligent Digital (ID) sensors use the CAN protocol and feature a LED to enable easy identification. The SR sensors also have identification built in so the handsets can recognise the type and size of sensor being used. There is a wide range of cables and connectors to suit all applications. The ID sensors are connected in-line with one another, by way of a Y cable, often resulting in shorter cable lengths. The CT and CTR series of turbine flow meters, provide a complete solution to the flow and temperature measurement of hydraulic systems on test stands, machine tools and other fixed or mobile applications. The flow meter can be installed anywhere in the hydraulic circuit for production testing, commissioning, development testing and control systems. The compact design allows the flow meters to be installed where space is limited. The integral loading valve built into the CTR series provides smooth progressive pressure control in both flow directions allowing components such as cylinders or motors to be tested without re-plumbing the test connections. The pressure sensors are available in six different ranges up to 1000 bar and all measure temperature as well. The whole unit is housed in a stainless steel body, sealed to IP67. Milwaukee, WI 53235, USA Tel: +1 (414) 769-6400 sales-us@webtec.com St. Ives, Cambs. PE27 3LZ, UK Tel: +44 (0) 1480 397 400 sales-uk@webtec.com Features Flowmeters l FLOW: – 1 -750 lpm 0.25 - 200 US gpm l PRESSURE: Upto 480 bar, 7000 psi l PORTING: BSPP or SAE BI directional operation Flowmeters with Loading Valve l FLOW: – 1 -750 lpm 0.25 - 200 US gpm l PRESSURE: Upto 480 bar, 7000 psi l PORTING: BSPP or SAE l BI DIRECTIONAL operation ‘INTERPASSTM’ safety system, bypasses oil internally in the event of valve being over pressurised l FLOWMETER TEMPERATURE: -25 to 125°C (-13 to 257 °F) Pressure transducers l PRESSURE: -1 to 1000 bar (-14.5 to 14500 psi) Accessories l CABLES: 0.5 to 20 meter long Hydraulic measurement and control

Specifications Model Number Main ports Flow range Replace *** with CAN or SR to give complete model number. *CT 15 has one of the specified top ports. Dimensions in mm (inches) Model Number SR version is 9mm (3/8”) shorter on the D dimensions One M16 x 2 test point fitted as standard (Not shown) Pressure / Temp. connections * Note. CT 15 has also one Pressure / Temp connection

Flowmeters with loading valve Specifications Model Number Main ports Replace *** with CAN or SR to give complete model number. Flow range Dimensions in mm (inches) Model No Add 20mm (3/4”) to G for full height including feet. SR version is 9mm (3/8”) shorter on the G dimensions D CT300R position only One M16 x 2 test point fitted as standard (Not shown) CT750R position only Pressure/Temp connections Functional specification CT and CTR flow meters Ambient temperature: Fluid type: Fluid temperature: Filtration Viscosity range Temperature display: Accuracy: Repeatability: Degree of...

Model Number Pressure range Replace * with ‘N’ for no temperature and with’ T’ for unit with temperature. Supplied with M16 x 2 test point connector SR-PTN-***-05-0C Functional specification Ambient temperature: Fluid type: Fluid temperature: Accuracy: Electrical specification Power supply: Response Time: -25 to 85 °C (-13 - 185 °F) Oils, fuels, water glycol, water oil emulsions -25 to 105 °C (-13 - 221 °F) Pressure: ± 0.5% full scale Temperature: ± 3 °C (SR-PTT-* ONLY) CAN: 8 - 40 VDC SR: 7-15 VDC SR 1 ms Construction material Main body: Sealing: Degree of protection*: Wetted parts:...