SONOPOWER MODULE GENERATOR - Weber Ultrasonics - #2

For rod transducers 050 mm

Requiring a minimum of space, the extremely compact generator modules in the SONOPOWER series can be implemented in even the most extensive systems, such as applications in industrial component cleaning or electroplating. Each module is an independent power unit which can be monitored and controlled separately via a programmable controller interface.

Three different casings are available for the generators: Depending on the total output, the GTE 84 casing can host a maximum of 5 modules and the power is supplied as three-phase current 3x400 Volt 50/60 Hz (5-wire system). Up to 2 modules with a maximum output of 1,500 W each can be integrated into the GTE 42 casing. As for the GTE 28 casing, which has been designed for 1 module with up to 2 kW power output, a single-phase mains connection with 230 Volt 50/60 Hz is sufficient as power supply.

100% dry run protection - Since SONOPOWER module generators automatically detect the risk of running dry and reduce the output accordingly when using ultrasonic transducers of the SONOPUSH series, damage to the ultra­sonic devices is effectively prevented. This makes other­wise necessary tank level monitoring redundant. The operating status is clearly visible at all times on LED dis­plays on the front panel. SONOPOWER module generators are CE certified and tested by the German Association for Safety Inspections TUV in Mannheim.

Article Type SP Length A mm

o o

WU 600 WU 600

WU 1000 WU 1000 WU 1000 WU 1200 WU 1200

WU 1500

WU 1500 WU 1500 WU 1500 WU 2000 WU 2000 WU 2000

402 000 01 402 000 02 402 000 03

402 000 04

402 000 05

402 000 06 402 000 07 402 000 08 402 000 09

402 000 10 402 000 11 402 000 12 402 000 13 402 000 14

198 297 297 396 495 396 495 495 594 693 891 891 1089 1287

For rod transducers 038 mm

402 100 01 402 100 03 402 100 06 402 100 08 402 100 24 402 100 10 402 100 14

For rod transducers 030 mm

For submersible transducers

40nArticle^^^H

Article Type T

401 200 03 WU 600

401 200 04 WU 1000

401 200 05 WU 1200

401 200 06 WU 1500

401 200 07 WU 2000

402 200 02 402 200 04 402 200 06 402 200 07 402 200 09

All devices with 25-pole d-sub remote control interface socket. GTE 84: 449x222x411 mm at 3x400 V - 50/60 Hz GTE 42: 236x222x411 mm at 230 V - 50/60 Hz GTE 28: 168x180x410 mm at 230 V - 50/60 Hz

SONOPOWER (GTE 84 casing)

< Cover illustration: SONOPOWER (GTE 42 casing)

Weber Ultrasonics GmbH Phone: +49 (0) 72 48/92 07-0

Im Hinteracker 7 F ax: +49 (0) 72 48/92 07-11

76307 Karlsbad-Ittersbach mail@weber-ultrasonics.de

Germany www.weber-ultrasonics.de