Ultrasonic Sensors UFP, UPA
7Pages

{{requestButtons}}

Catalog excerpts

Ultrasonic Sensors UFP, UPA - 1

Key-Features: - Available measurement ranges from 250 to 6000 mm - Ultrasonic distance sensor or proximity switch - Teachable measurement range - M12J M18/ M30 thread housings - Linearity up to 0.3 % - Working temperature -20 to +70 °C - Measurement is independent of the targets material, surface, colour or transparency - Protection class up to IP67

Open the catalog to page 1
Ultrasonic Sensors UFP, UPA - 2

TECHNICAL DATA Distance sensor Detection range Repeatability * Linearity error Response time Signal output Teachable measurement range Current consumption (no load) [mA] Inv erted characteristic curv e Control inputs Saf ety f eatures Temperature range Protection against rev erse polarity and short circuit [°C] Connection Design Case material Angle of the sound cone Switching points Visualization of current state Adjustment of switching points Max. output current Proximity switch Detecting range Protection class M12 connector, cable output Current consumption (no load) [mA] Control inputs...

Open the catalog to page 2
Ultrasonic Sensors UFP, UPA - 3

TECHNICAL DRAWINGS UFP SERIES UFP-200 Measuring range: 250 mm Output: 1 x Switching Output or 0...10 V UFP-400/ 500/ 800/ 1600/ 2000: Measuring range: up to 2000 mm Output: 2 x Switching output or 0...10 V or 4...20 mA UFP-3500: Measuring range: 3500 mm Output: 2 x Switching output or 0...10 V or 4...20 mA TECHNICAL DRAWINGS UPA SERIES UPA-6000: Measuring range: 6000 mm Output: 2 x Switching output or 0...10 V or 4...20 mA

Open the catalog to page 3
Ultrasonic Sensors UFP, UPA - 4

+ 24 V Teach-In Switch / Analog output 0 V UFP-200: connection cable, 4 pole Cable with M12 connector, 4-pole, IP67 K4P2M-S-M12 2 m, M12-connector straight + 24 V Analog output Teach-In 0 V Cable output: cable colour Cable output: cable colour * UFP-3500: cable colour white UPA-6000 with analog output: PIN configuration UPA-6000 as proximity switch: PIN configuration + 24 V Analog output Teach-In 0 V PIN No. Cable colour Pin 1 brown Cable with M12 connector, 5-pole, shielded, IP67 K5P2M-S-M12 2 m, M12-connector straight

Open the catalog to page 4
Ultrasonic Sensors UFP, UPA - 5

TEACH-IN GUIDE Analog Output 0...10 V / 4...20 mA (Teach-In) Normal operation: EC (Echo LED) GREEN: P1 LED, P2 LED YELLOW: Teach-In (Line): each-In Activates whenever echo is received (support for orientation). One of the lamps is lit whenever the target quits the zone between P1 and P2 Connect activating line to GND (time required for teach-in: ca. 30 sec). Characteristic curve (P1 < P2): P1 – 0 V / 4 mA und P2 = 10 V / 20 mA 1. Teach-In must remain coupled to GND (ca. 6 - 8 sec.), until EC (Echo LED) and P1 start to flash (2 Hz) (UFP-200 only YELLOW). 2. Now P1 starts to flash (1 Hz), and...

Open the catalog to page 5
Ultrasonic Sensors UFP, UPA - 6

SOUND CONE GEOMETRY The exact geometry of the sound cone depends on the air-pressure, temperature, humidity and the size of the target.

Open the catalog to page 6
Ultrasonic Sensors UFP, UPA - 7

ORDER CODE UPA SERIES ACCESSORIES Cable with M12 connector, 5-pole, shielded Cable with M12 connector, 4-pole (for UFP-200) Connector M12, 5-pole, shielded Subject to change without prior notice. WayCon Positionsmesstechnik GmbH E-Mail: info@waycon.de Internet: www.waycon.de

Open the catalog to page 7

All WayCon Positionsmesstechnik GmbH catalogs and technical brochures

  1. LVIG SERIES

    5 Pages