catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
P. 08
P. 09
P. 10
P. 11
P. 12
P. 13
P. 14
P. 15
P. 16
P. 17
P. 18
P. 19
P. 20
P. 21
P. 22
P. 23
P. 24
P. 25
P. 26
P. 27
P. 28
P. 29
P. 30
P. 31
P. 32
P. 33
P. 34
P. 35
P. 36
P. 37
P. 38
P. 39
P. 40
P. 41
P. 42
P. 43
P. 44
P. 45
P. 46
P. 47
P. 48
P. 49
P. 50
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You may also be interested in
Thermowell, Cable, Band heater, Temperature limiter, Thermocouple cable
Text version of the page
Specifications Cont. Operator Interface
1 â„
32 DIN)•Isolated EIA-485 Modbus™ serialcommunications. 9600,19.2K or 38.4K baud rates Agency Approvals Wiring Termination -Touch SafeTerminals •UL •Input power and control outputs12 to 22 AWG•Sensor inputs and processoutputs 20 to 28 AWG Universal Input •Thermocouple, grounded orungrounded sensors•RTD 2- or 3-wire, platinum, 100
® 3121, C-UL
® ‚ CSA, CE,NEMA 4X/IP65•Limit version features FM approval •NSF for Type J, K, T and Ethermocouples Ω / Ω /°C)•Process, 0-20mA @ 100 Ω @ 0°C calibration to DIN- curve (0.00385 Ω , or 0-10V Control OutputsOutputs 1, 2 , 3 (Output 3 notavailable on Controller Î (dc) @ 20k Ω inputimpedance; Scalable•Inverse scaling•>20M •Microprocessor based user-selectable control modes•Single universal input, up to threeoutputs•Control sampling rates: Input = 6.5Hz, Display = 10Hz, and Outputs = 6.5Hz Ω input impedance•Maximum of 20 Ω sourceresistance
1 â„
32 DIN) •User selectable for heat/cool ason-off, P, PI, PD, PID or Alarm action. Not valid for limit controls•Electromechanical relay. Form A,rated 2A @ 120V Å (ac), 2A @240V Dimensions Å (ac) or 2A @ 30V Î (dc)•Switched dc non-isolatedminimum turn on voltage of 6V Î (dc) into a minimum 500 Ω
DIN SizeBehind PanelWidthHeight(max.) load with a maximum on voltageof not greater than 12V
1 â„ 32 DIN97.8 mm52.6 mm29.7 mm(3.85 in.)(2.07 in.)(1.17 in.) Î (dc) intoan infinite load. Maximum switched dc power supply current available for up to two outputs is 60mA•Solid state relay, Form A, 0.5A @24V Å (ac) minimum, 264V Å (ac)maximum, opto-isolated, withoutcontact suppression
1 â„ 16 DIN97.8 mm52.1 mm52.1 mm(3.85 in.)(2.05 in.)(2.05 in.) 1 â„ 8 DIN97.8 mm52.8 mm99.8 mmVertical(3.85 in.)(2.08 in.)(3.93 in.) 1 â„ 8 DIN97.8 mm99.8 mm52.8 mmHorizontal(3.85 in.)(3.93 in.)(2.08 in.) 1 â„ 4 DIN101.1 mm99.8 mm99.8 mm(3.98 in.)(3.93 in.)(3.93 in.) 30
Temperature and Power Controllers catalog - 7347 Auto-Tuning PIDControllers
Allowable Operating Range •Dual 4 digit, 7 segment LEDdisplays•Advance, infinity and up downkeys•Optional IrDA infrared port (notavailable on Type J:0to815°C(32to1500°F)Type K:-200to1370°C(-328to2500°F)Type T:-200to400°C(-328to750°F)Type N:0to1300°C(32to2372°F)Type E:-200to800°C(-328to1470°F)Type C:0to2315°C(32to4200°F)Type D:0to2315°C(32to4200°F)Type PTII:0to1395°C(32to2543°F)Type R:0to1760°C(32to3200°F)Type S:0to1760°C(32to3200°F)Type B:0to1816°C(32to3300°F)RTD (DIN):-200to800°C(-328to1472°F)Process:-1999to 9999 unitsSD_C
Accuracy •Calibration accuracy and sensor conformity: ±0.1 percent of span, ±1°C @ the calibrated ambient temperature and rated line voltage•Calibration ambient temperature = 25°C ±3°C (77°F ±5°F) •Accuracy span: 540°C (1000°F)minimum•Temperature stability: ±0.1°C/°C(±0.2°F/°F) rise in ambient maximum1 â„
32 DIN)•Isolated EIA-485 Modbus™ serialcommunications. 9600,19.2K or 38.4K baud rates Agency Approvals Wiring Termination -Touch SafeTerminals •UL •Input power and control outputs12 to 22 AWG•Sensor inputs and processoutputs 20 to 28 AWG Universal Input •Thermocouple, grounded orungrounded sensors•RTD 2- or 3-wire, platinum, 100
® 3121, C-UL
® ‚ CSA, CE,NEMA 4X/IP65•Limit version features FM approval •NSF for Type J, K, T and Ethermocouples Ω / Ω /°C)•Process, 0-20mA @ 100 Ω @ 0°C calibration to DIN- curve (0.00385 Ω , or 0-10V Control OutputsOutputs 1, 2 , 3 (Output 3 notavailable on Controller Î (dc) @ 20k Ω inputimpedance; Scalable•Inverse scaling•>20M •Microprocessor based user-selectable control modes•Single universal input, up to threeoutputs•Control sampling rates: Input = 6.5Hz, Display = 10Hz, and Outputs = 6.5Hz Ω input impedance•Maximum of 20 Ω sourceresistance
1 â„
32 DIN) •User selectable for heat/cool ason-off, P, PI, PD, PID or Alarm action. Not valid for limit controls•Electromechanical relay. Form A,rated 2A @ 120V Å (ac), 2A @240V Dimensions Å (ac) or 2A @ 30V Î (dc)•Switched dc non-isolatedminimum turn on voltage of 6V Î (dc) into a minimum 500 Ω
DIN SizeBehind PanelWidthHeight(max.) load with a maximum on voltageof not greater than 12V
1 â„ 32 DIN97.8 mm52.6 mm29.7 mm(3.85 in.)(2.07 in.)(1.17 in.) Î (dc) intoan infinite load. Maximum switched dc power supply current available for up to two outputs is 60mA•Solid state relay, Form A, 0.5A @24V Å (ac) minimum, 264V Å (ac)maximum, opto-isolated, withoutcontact suppression
1 â„ 16 DIN97.8 mm52.1 mm52.1 mm(3.85 in.)(2.05 in.)(2.05 in.) 1 â„ 8 DIN97.8 mm52.8 mm99.8 mmVertical(3.85 in.)(2.08 in.)(3.93 in.) 1 â„ 8 DIN97.8 mm99.8 mm52.8 mmHorizontal(3.85 in.)(3.93 in.)(2.08 in.) 1 â„ 4 DIN101.1 mm99.8 mm99.8 mm(3.98 in.)(3.93 in.)(3.93 in.) 30