Temperature and Power Controllers catalog - Watlow - #219

/ 420


catalogue search
P. 201
P. 202
P. 203
P. 204
P. 205
P. 206
P. 207
P. 208
P. 209
P. 210
P. 211
P. 212
P. 213
P. 214
P. 215
P. 216
P. 217
P. 218
P. 219
P. 220
P. 221
P. 222
P. 223
P. 224
P. 225
P. 226
P. 227
P. 228
P. 229
P. 230
P. 231
P. 232
P. 233
P. 234
P. 235
P. 236
P. 237
P. 238
P. 239
P. 240
P. 241
P. 242
P. 243
P. 244
P. 245
P. 246
P. 247
P. 248
P. 249
P. 250


See other catalogues for Watlow

Text version of the page
Integrated Multi-Function EZ-ZONE RM Programmable Application Blocks Compare • Greater than, less than, equal, not equal, greater than or equal, less than or equal Counters • Counts up or down, loads predetermined value on the load signal. Output is active when the count value equals or exceeds predetermined target value Linearization • Interpolated or stepped relationship Logic • And, nand, or, nor, equal, not equal, latch, flip flop Math • Average, process scale, deviation scale, differential (subtraction), ratio (divide), add, multiply, absolute difference, min., max., square root, sample and hold, altitude and dew point Process Value • Sensor backup, average, crossover, wet/dry bulb, switch over, differential (subtraction), ratio (divide), add, multiply, absolute difference, min., max., square root, altitude, visala and dew point Special Output Function • Compressor - turns on-off compressor for one or two loops (cool and dehumidify with single compressor) • Motorized valve - turns on-off motor open/closed outputs causing valve to represent desired power level • Sequencer - turns on-off up to four outputs to distribute a single power across all outputs with linear and progressive load wearing Timers • On pulse - produces an output of fixed time on the active edge of timer run signal • Delay - output is a delayed start of timer run and off at same time • One shot - oven timer • Retentive - measures timer run signal and output on when accumulated time exceeds target Variable • User value for digital or analog variable EZ-ZONE RM Family Comparison Control Module High-Density Control Module High-Density Limit Module Expansion Module High-Density Scanner Number of modules per system 1 to 16 1 to 16 1 to 16 1 to 16 1 to 16 Number of PID loops per module 1 to 4 4, 8, 12 or 16 0 0 0 Number of limit loops per module 1 to 4 0 4, 8 or 12 0 0 Number of monitoring points per module 1 to 3 0 0 0 4, 8, 12 or 16 Mechanical relays per module 1 to 8 4 or 8 4, 6 or 8 4, 8 or 12 4 or 8 Digital I/O points per module 6 6 or 12 6 or 7 6, 12, 18 or 24 6 or 12 Actions (events) per module 8 24 16 8 16 Alarms per module 8 24 16 8 16 Compare per module 4 24 16 8 24 Counters per module 4 24 16 8 24 Linearization per module 4 24 16 8 24 Logic per module 4 24 16 8 24 Math per module 8 24 16 8 24 Process value per module 1 to 4 1 to 24 0 0 16 Special output function per module 4 0 0 4 0 Timers per module 4 24 16 8 24 Variable per module 8 24 16 8 24 WATLOW® 215

pageCatalog pdf di En 2012-06-22-01