Text version of the page

W A T L O W

Plastics catalog - 7347 Barrel Heaters

THINBAND Mica

Barrel Heater Variations

QUICK CLAMP must be supplied atone gap when ordering. Continued Å (ac) power supply. In thiscase the barrel heater lead wire insulation must be rated for480V Å (ac). Available from stock bycombining two one-piece heaters to create a large diameter. Terminations willbe90 degrees from eachgap. Two-Piece Barrel Heaters Two-piece construction is availableon heaters 127 mm (5 in.) or greater in diameter. Heaters 38 mm (1.5 in.)wide and greater with post terminalshave the two terminals side-by-side. Stock LA OptionNon-Stock Option Stock OptionStock Option Stock OptionStock Option Note: When ordering two-piecebarrel heaters, specify the volts and watts per half. power supply voltage. On two-piece unitswith leads, you must also specify the Example: a two-piece barrel that is 240V Å (ac)per half may be wired in series to a 480V Å (ac), maximum volts 240.When ordering, specify
Injection Molding vertical or
Barrel Heaters horizontalEuropeanPlug.High Temperature “Quick Disconnect”European Style Plugs
73 mm(2.875 in.) 60 mm(2.375 in.) 45 mm(1.75 in.) They provide the simplest and safestway to apply power to barrel heaters.The combination of high temperature male and female quick disconnect plug assemblies eliminates all live exposed terminals and electrical wiring that can be apotential hazard to employees ormachine. Maximum 15 amps at 240V
48 mm(1.875 in.) 35 mm(1.375 in.) VerticalHorizontal High Temperature “Quick Disconnect”European Style Female Adapters N6027AF049 or N6027ZZ028 Available as an accessory item thatmust be used in conjunction with high temperature “quick disconnect”European Style Plugs. Specify codenumber and quantity.
Right Angle Straight Code # N6027ZZ028 Code # N6027AF049 See page 38 forminimum/maximumdimensional requirements. 41