| | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | | | |
| | | |
| | | THINBAND Mica Physical Limitations of Lead Variations | | |
| | | Physical Limitations of Lead Variations | | |
| | | |
| | | | | | | | | | | | | | | | | | Diameter | Width | | | | Heater Type | Min. | Max. | Min. | Max. | | | | mum | mm | | mm | (in.) | mm | (in.) | mm | (in.) | | | | 1 pc. const. | 25.4 | (1) | 368.3 | (1432) | 38.1 | (1/) | 177.8 | (7) | | | | 2 pc. const. | 127.0 | (5) | 736.6 | (29) | 38.1 | (1/) | 177.8 | (7) | | | | | | | | | | | | | | | | Type A | 25.4 | (1) | 101.6 | (4) | 25.4 | (1) | 152.4 | (6) | | | | Type L | 25.4 | (1) | 101.6 | (4) | 25.4 | (1) | 152.4 | (6) | | | | Barrel | | | | | | | | | | | | Type T | 63.5 | (2)2) | | | 38.1 | (1/) | 177.8 | (7) | | | | Type H | 63.5 | | | | 38.1 | (1/) | 177.8 | (7) | | | | Type F, FR | 63.5 | | | | 38.1 | (1/) | 177.8 | (7) | | | | Type E | 63.5 | (2/) | | | 38.1 | (1/) | 177.8 | (7) | | | | Type C, BR | 63.5 | (2/) | | | 38.1 | (1/) | 177.8 | (7) | | | | Type K, KR | 63.5 | (2/) | | | 38.1 | (1/) | 177.8 | (7) | | | | | 88.9 | (3/) | | 38.1 | (1/) | 177.8 | (7) | | | | European Plug | | | | | | | | | | | | 1 pc. vertical | 63.5 | (2/) | 368.3 | (14/) | 38.1 | (1/) | 177.8 | (7) | | | | 1 pc. horizontal | 63.5 | (2/) | 368.3 | (14/) | 38.1 | (1/) | 177.8 | (7) | | | | Welded Barrel Nuts | | | | | | | | | | | | 1 pc. | 63.5 | (2/) | 368.3 | (14/) | 38.1 | (1/) | 177.8 | (7) | | | | | | | | | | | | | | | | |
| | | |
| | | Check the table to be certain the variations and lead arrangements you order are available on the heater size you require. If you need to exceed any limitations please contact a Watlow representative. THINBAND Barrel | | |
| | | |
| | | J0-24 thread | | |
| | | |
| | | 32 mm (1.25 in.) | | |
| | | |
| | | 2.8 mm (0.110 in.) | | |
| | | |
| | | Note: Some combinations of maximums and minimums cannot occur on the same heater. Check the table to be certain the variations and lead arrangements you order are available on the heater size you require. If you need to exceed any limitations, please contact your Watlow representative. Standard gap is 9.53 mm (0.375 in.) between clamp specifications bars. | | |
| | | |
| | | Minimum 63 mm (2.5 in.) Maximum 368 mm (14.5 in.)1pc. 736 mm (29 in.) 2pc. | | |
| | | |
| | | |
| | | 14 mm —l (0.5625 in.) | | |
| | | |
| | | Minimum 38 mm (1.5 in.) Maximum 177 mm (7 in.) | | |
| | | |
| | | 38 | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | |