Å (ac),50/60Hz•Output voltage: V1 +5V
PPC-2000
PPC-IPS-2 -
Power feeding The PPC-IPS-2 supplies power to aPPC-2000 system which requires a
12 to 28V Î (dc) power source. Thepower supply also provides 5V PPC-207X - Digital Input Module Î (dc)to drive digital outputs on the
processor module. Î (dc) at 6 ampsV2 +24V The PPC-207X accepts input signals from on-off sensors. The digital input
module is available with8or 16 inputs. Î (dc) at 4 amps•Peak current output: 9A @5V Î (dc); 6A @ 24V Î (dc)•Agency approvals: CE, UL Specifications General
® andC-UL •Dimensions: 114.3 mm (4.5 in.) Hx 48.3 mm (1.9 in.) W x 215.9 mm
(8.5 in.) D •Mounting: DIN-rail or panel mount •Input voltage: 120/240V
® recognized PPC-2010 - Processor Module Ordering Information
To order, complete the model number on the right with the information below. P PC - 2 0 1 0-
The PPC-2010 Processor Module includes ANAWIN3-CNF software for PPC-2000 configuration only and a TB50-SCSI digital I/O terminal board. A PPC-2000 system can have up to 10 modules. Processor Module (with TB50)Digital I/O Cable Specifications General
(Cable from module to terminal board)1 = 3 foot cable (CA-SCSI-3)2 = 6 foot cable (CA-SCSI-6) •Input status LEDs•Maximum number of modules per system: 4 ı (ac/dc) ±10 percent(PPC-2072/3)•Input response time: 32ms, 64 ms 12-20V Å (ac)±10 percent (PPC-2070/1), 12-24V •Number: 8 or 16
•Input range: 70-120V
Communication Cable (Cable between processor and host computer)1=10 foot EIA/TIA-232 cable, Handset plug to DB9F (CA-232-DB910)2=25 foot EIA/TIA-232 cable, Handset plug to DB9F (CA-232-DB925)3=50 foot EIA/TIA-232 cable, Handset plug to DB9F (CA-232-DB950)4=10 foot EIA/TIA-232 cable, Handset plug to DB25F (CA-232-DB2510)5=25 foot EIA/TIA-232 cable, Handset plug to DB25F (CA-232-DB2525)6=50 foot EIA/TIA-232 cable, Handset plug to DB25F (CA-232-DB2550)A=EIA/TIA-485 terminal block manufacturers with 2 foot cableB=EIA/TIA-485 terminal block with 4 foot cable Input Å (ac)•Logic levels: < 20V Å (ac) = Low,>70V Å (ac) = High (PPC-2070/1);< 3V Î (dc) = Low, >10V Î (dc)= High (PPC-2072/3)
Power Supply (DC power for the PPC-2000)0=No power supply (customer provides own supply)2=PPC-IPS-2 supply; 24V Î (dc) @ 4 A and 5V Î (dc) @ 6A 262