W A T L O W
PPC-206X - Digital Output Module The PPC-206X relayoutput drives
actuators manufacturers,
pilot lights and other
devices. Each output is
user configurable foralarms or logic. Thedigital output module is
available with 8 or 16
relays.
PPC-2000
The PPC-205X modulegenerates analog output
signals to control power
controllers, variable
frequency drives andother devices. Theanalog output module is
available with 4 or 8
outputs. PPC-2040 - Digital I/O Module Cont.PPC-205X - Analog Output Module Specifications General •Each point selectable as input or output•2 points selectable as input,output or counter/frequency•Maximum number of modules per system: 6 Counter/Frequency •Number: 2
•Maximum frequency: 10kHz(single-phase)32kHz (quadrature)•Sample rate: 250 ms (4Hz)•Count range: 16 bits Specifications Specifications General General Digital Input •Maximum number of modules per system: 4 •Output status LEDs•Maximum number of modules persystem: 6 •Number: 32•Voltage limiting and protection:40V •Number: 4 (isolated) or 8 (pairisolated)•Current or voltage selectable
•Isolation from power common andearth ground: 120V Output •Number: 8 or 16
•Contact voltage rating:240V Å (ac), 30V Î (dc)•Relay type: Form A (SPST, NO onfault or inactive)•Isolation: 240V Î (dc)•Logic levels: <0.6V Å (ac)•Isolation from output to output(PPC-2051): 120V Output Î (dc) = Low;>3.8V Î (dc)•Maximum current: 150mA sink tocommon
Temperature Controllers •Number: 32
•Maximum voltage: 24V Î (dc) = High Å (ac)•Isolation between output pairs(PPC-2050): 120V Å (ac) to powercommon or ground•Maximum load current: 2A perrelay (PPC-2062), 1A per relay, 5A per common (PPC-2061)•Commons: 8 (PPC-2062), 2 (PPC-2061)
Extrusion Digital Output Å (ac)•Voltage range: 0-10V Î (dc) @10mA maximum•Current range: 0-20mA with 8Vmaximum compliance (400 1 load)•Accuracy: ±0.5 percent voltage,±0.8 percent current of range at
25°C (75°F)•Output update time: 0.1 second•Resolution: 12 bit 261