Input Module Options Choose the input moduleappropriate for the application: •AIM316 and AIM332 provides screw terminations for 16 or 32sensors•
W A T L O W
16-, 32-Loop MLS300
Serial Interface •EIA/TIA-232 or EIA/TIA-485 Baud Rate CIM316 and CIM332 provides DB-50
connector specifications terminations for
16 or 32
detection in a compact size •2400, 9600 or 19200, user-selectable Communication Protocol •Modbus™ RTU
25 mm(1.00 in.)188 mm(7.40 in.)41 mm*(1.60 in.) Line Voltage/Power •15 to 24V Î (dc) ±3V Î (dc) @ 1A Agency Approvals •UL
® , C-UL
® Listed: UL
® 916,Standard for Energy Management
Equipment•CE Mark: ElectromagneticCompatibility (EMC) Directive
89/336/EEC
50 mm(1.96 in.) Firmware Options Choose firmware with the featuresneeded for the application:•Standard—includes closed-loopPID control, auto-tune, alarms, job
memory and failed sensor
detection•
Extruder suppliers— includes the standardfirmware features, with PID control
specifically adapted for plasticextruders•Enhanced Features— includesthe standard firmware features
with the addition of process
variable retransmit, remote analog
set point, cascade control, ratio
control and differential control
algorithms. Each channel can be
configured for standard PID
control or one of the other control
algorithms. Each channel of
cascade control or remote analog
set point requires two controller
channels. Unused control outputs
on any channel can be
configured for retransmit
*15 mm (0.60 in.) with Right Angle SCSI Connector Processor Module (Side)
Temperature Controllers Extrusion UNITS RAMPSOAKALARMACK 50 mm(1.96 in.) SETPOINTOUT% CHNGSP NOMANAUTO
PROCESSLOOPALARMSTATUS BACK ENTER YES 96 mm(3.78 in.) Processor Module (Front) 255