Plastics catalog - Watlow - #18

/ 411


catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
P. 08
P. 09
P. 10
P. 11
P. 12
P. 13
P. 14
P. 15
P. 16
P. 17
P. 18
P. 19
P. 20
P. 21
P. 22
P. 23
P. 24
P. 25
P. 26
P. 27
P. 28
P. 29
P. 30
P. 31
P. 32
P. 33
P. 34
P. 35
P. 36
P. 37
P. 38
P. 39
P. 40
P. 41
P. 42
P. 43
P. 44
P. 45
P. 46
P. 47
P. 48
P. 49
P. 50


See other catalogues for Watlow

Text version of the page
•Same day shipment on all stock heaters with postterminals or Type B leads.

Plastics catalog - 7347 Barrel Heaters

MI Band

The MI Band is a high performanceheater. Its performance and name are derived from Watlow’s exclusive mineral insulation—a material that has much higher thermal conductivity than the mica and hard ceramic insulators used in conventional heaters.A thin layer of the “high” thermalconductive MI material is used to electrically insulate the element wire from the inside diameter of the heater sheath. A thicker, “low” thermal conductivity layer backs up the element wire, directing the heat inward towards the part that is being heated. The result is more efficient heat transfer...a performance solution that lowers element wire temper- atures and increases heater life.
Thick LowConductivityMI BackingCoiled or SinuatedWire Element Performance Capabilities •Heater operating temperatures to760°C (1400°F) •Watt densities to 35.6 W/cm
2 Permanently attached clampbars (230 W/in
2) available on smalldiameter nozzle bands•Watt densities to 15.5 W/cm Stainless steel cover as well as side fold design eliminate cumbersomeclamping straps, which makes installation easier. resistcontamination by overflow of plastic or other free-flowing materials. Side folds turn to the inside diameter rather than the outside diameter.•
2 Element Wire inMineral InsulationStainlessSteel SheathThin HighConductivityMI Insulation (100 W/in
2) available on largediameter barrel bands Features and Benefits • Operating temperatures to760°C(1400°F) make it possibleto safely melt even the newest resins, like Peek™, Teflon
® , Ultem
® andZytel
® .• Higher watt densities than anyother barrel heater Applications contribute tofaster heat-up and through-put to increase productivity.• •Injection molding barrels High thermal conductivity of MIand low mass construction givealmost instant response to temperature control. This performance solution eliminates thermal lag and temperature overshoot associated with ceramic knuckle heaters. •
Teflon ® and Zytel ® are registered trademarksof E.I. du Pont de Nemours & Company.Ultem ® is a registered trademark of GeneralElectric.Peek™ is a trademark of Victrex plc. 18

pageCatalog pdf di En 2012-02-06-12