| | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | and Heaters | | |
| | | |
| | | Physical Limitations of Lead Variations | | |
| | | THINBAND Mica Barrel and Nozzle Physical Limitations of Lead Variations Check the table to be certain the variations and lead arrangements you order are available on the heater size you require. If you need to exceed any limitations please contact a Watlow representative. THINBAND Barrel | | |
| | | |
| | | | | | | | | | | | | | | | | | Diameter | Width | | | | Heater Type | | Min. | Max. | | Min. | | Max. | | | | | in | (mm) | in | (mm) | in | (mm) | | n (mm) | | | | | | | | | | | | | | 1 pc. const. | i | (25.4) | 14)2 | (368.3) | | (38. ) | 7 | ( 77.8) | | | | 2 pc. const. | 5 | ( 1 27) | 29 | (736.6) | 1A | (38. ) | 7 | ( 77.8) | | | | Nozzle | | | | | | | | | | | | Type A | 1 | (25.4) | 4 | ( 1 0 1 .6) | 1 | (25.4) | 6 | ( 52.4) | | | | Type L | 1 | (25.4) | 4 | ( 1 0 1 .6) | 1 | (25.4) | 6 | ( 52.4) | | | | Barrel | | | | | | | | | | | | Type T | 2X | (63.5) | | | 1 K | (38. ) | 7 | ( 77.8) | | | | Type H | 2J2 | (63.5) | | | 1 A | (38. ) | 7 | ( 77.8) | | | | Type F, FR | 2J2 | (63.5) | | | 1 A | (38. ) | 7 | ( 77.8) | | | | Type E | 2J2 | (63.5) | | | 1 A | (38. ) | 7 | ( 77.8) | | | | Type C, BR | 2J2 | (63.5) | | | 1 )2 | (38. ) | 7 | ( 77.8) | | | | Type K, KR | 2J2 | (63.5) | | | 1 A | (38. ) | 7 | ( 77.8) | | | | Terminal Box | 3J2 | (88.9) | | | 1 )2 | (38. ) | 7 | ( 77.8) | | | | European Plug | | | | | | | | | | | | 1 pc. vertical | 2J2 | (63.5) | 14)2 | (368.3) | 1 )2 | (38. ) | 7 | ( 77.8) | | | | 1 pc. horizontal | 2J2 | (63.5) | 14)2 | (368.3) | 1 )2 | (38. ) | 7 | ( 77.8) | | | | Welded Barrel Nuts | | | | | | | | | | | | 1 pc. | 2X | (63.5) | 14)2 | (368.3) | VA | (38. ) | 7 | ( 77.8) | | | | | | | | | | | | | | | | |
| | | W a) a. | | |
| | | |
| | | |
| | | x CD fi) CD | | |
| | | 10-24 thread | | |
| | | |
| | | |
| | | 1Î4" (32 mm) | | |
| | | |
| | | 0.156" (3.9 mm) | | |
| | | |
| | | Note: Some combinations of maximums and minimums cannot occur on the same heater. Check the table to be certain the variations and lead arrangements you order are available on the heater size you require. If you need to exceed any limitations, please contact your Wfotlow representative. Standard gap is 58 inch (9.53 mm) between clamp bars. | | |
| | | |
| | | Minimum 2T (63 mm) Maximum 14J2" (368 mm) 1pc. 29" (736 mm) 2pc. | | |
| | | |
| | | |
| | | 9A" (14 mm) | | |
| | | |
| | | Minimum 114" (38 mm) Maximum 7" (177 mm) | | |
| | | |
| | | 25 | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | |