X8100 XNET Transceiver DS151 - Warwick Wireless - #1

/ 4


catalogue search
X8100 XNET Transceiver DS151 - Warwick Wireless
P. 01
X8100 XNET Transceiver DS151 - Warwick Wireless
P. 02
X8100 XNET Transceiver DS151 - Warwick Wireless
P. 03
X8100 XNET Transceiver DS151 - Warwick Wireless
P. 04
Pages:
X8100 XNET Transceiver DS151 - Warwick Wireless


See other catalogues for Warwick Wireless
You may also be interested in

Antenna, Radio modem, Counter, Ethernet bridge, Controller


Text version of the page

W WARWICK WIRELESS ARWICK WIRELESS

X8100 XNETTELEMETRY NETWORK

LIMITEDLIMITED

DATASHEET 151 FEATURES •

Operates on international licensed and licence free radiotelemetry bands.

Range:X8100 – 433 MHz2km in free space, 0.2 - 0.5km in buildingsX8100 – 458 MHz20km in free space, 1 – 3km in buildingsX8100 – 868 MHz10km in free space, 0.7 – 2km in buildingsX8100 – GSMWorld Wide GSM Mobile Phone Network X8100 – LLMLeased Telephone Line Type approved to ETSI 300-220, ETSI 300-113, ETSI 300-683,MPT1328, MPT1329, MPT1340, MPT1344 8 to 128 Digital Inputs 8 to 128 Digital Outputs, Voltage Free Contacts 30Vdc @ 1A 2 to 128 Analogue Inputs 0-20mA (Standard), 0-10V, 0-500mV. (factory set option) 2 to 128 Analogue Outputs 0-20mA (Standard), 0-10V, 0-500mV. (factory set option) 1 Serial Output Port for SCADA System DIN Rail Mounted Powered from 24Vdc (Standard), 110Vac, 240Vac.Size:X8100 Control Module 160mm by 105mm by 60mmX8100 I/O Modules 52mm by 105mm by 60mm

DESCRIPTION

The XNET Radio Data Network offers a cost effective and flexible means of transmitting analogue, digital, andpulse counter data over large areas without the need for cables. A programmable modular approach allows theuser to configure the exact combination of IO required for a specific application from standard XNET modules. A system can be as simple as a one-way link or as complex as a multi-drop network.An XNET Control Module consists of:1 Synthesised Radio Transceiver1 RS232 Serial Gateway Port8 Opto Isolated Inputs1 RS232 Programming Port8 Voltage Free Relay Outputs 1A, 30Vdc1 X-Bus Expansion Module Port 2 Analogue Inputs ,12bit, 0 to 20mA or 0 to 5V1 12V DC Power Supply for Transducers2 Analogue Outputs, 12 bit, 0 to 20mA or 0 to 5VAdditional analogue and digital Input/Output modules can be connected to the Control Module by means of asingle 10-way ribbon cable. The modules can be located locally or up to 50 metres away.
X8100Repeater X8100 Analogue,Digital & SerialData X8100 Analogue,Digital & SerialData X8100 Analogue,Digital & SerialData SCADASYSTEM X8100 Analogue,Digital & SerialData X8100 Analogue,Digital & SerialData Expanded I/O Expanded I/O Expanded I/O

WARWICK WIRELESS LIMITED

THE MANOR, ASTON FLAMVILLE, LEICESTERSHIRE, LE10 3AQ ENGLAND TEL: +44 (0) 1455 233616FAX: +44 (0) 1455 233179 WEB: www.radiotelemetry.co.uk

pageCatalog pdf di En 2012-06-22-01