Suction Gun - Wandres - #14

2 suction connec­tions 0 150 if A > 1000 mm

At the edges of the u-shaped Tornado Channel, compressed-air assisted nozzles produce a powerful cross-flow towards the suction system.

In the centre, there are either Power Nozzles (TKF 180) or rotating Tornado Nozzles (TKR 180) that blow vertically or at a slightly slant angle onto the surface and into the bore holes.

The particles rise and are transported towards the suction via the integrated vacuum channel. The overall compressed-air assisted flow pro­pels particles into the Tornado Channel itself.

With the TKF (Tornado Channel with Power Nozzles), the nozzles (pitched at 40 mm) should always be controlled electrically and individually (max. 20% at a time).

With the TKR (Tornado Channel with rota­ting nozzles), please note that the nozzles take approximately 0.5 seconds to reach their desi­red revolutions of approx. 300 - 600 min^l.

max 4 x G 1/2

6 bar

<3

Valves may be activated electrically or manually

Pressure rollers

Cleaning of upper surface of furniture parts after milling, drilling etc

rotating Tornado Nozzles

fixed Power Nozzles