Accessories
Air Force
TM Automatic Filling Station
Convenient, safe and very easy to use.Just place the Air Force sprayer onto the filling station and fill with liquid and
compressed air in one step.For use with:Slap Shot PL and Bolt-out.
Adaptor for 200 and 208 L Drums
Converts European to American thread toallow the use of any kind of accessories on
drums.
Order No. 53-L 110
SPECIFICATIONS
Conditioner Additive
Height:14 3/16" (36cm)Width:8 Prevents deposits on parts and cleaning equipment. Forcalcium/magnesium-rich rinsing water. Use only with GOLD MATRIX
HIGH STRENGTH cleaning solution.
3 /
4 " (22cm)Depth:9
7 /
8 " (25cm)Weight: 14,8 lbs (6,7Kg)
Operating pressure: 85 to 145 psi
Maximum pressure: 175 psi
Filling per cycle:13,5 fl. oz. (400ml)
Air inlet:
? Biodegradable, solvent-free Ordering Information
DescriptionSizeOrder No. MSDS
1 /
4 " NPTFilling modes: Air and liquid or air only Liquid950 ml53-G 003L-85E Order No. 53-M 012
Titration Kit
This kit allows you to quickly and accurately determine the exact
cleaner concentration to maintain a high level of cleaning productivity.
For use with GOLD MATRIX HIGH STRENGTH.
Durable Air Force
TM Sprayer
Sturdy and lightweight aluminum Air Force sprayer, comes with a product specific label to clearly identify contents and
ensure full WHMIS compliance.
Ordering Information
DescriptionOrder No.
SPECIFICATIONS
Titration kit53-L 160 Fill capacity:400 ml
Maximum pressure: 200 psi
Air Force sprayer for Slap Shot*53-M 102
Air Force sprayer for Slap Shot PL53-M 101
Industrial Pump Sprayers
Air Force sprayer for Bolt-out53-M 122* Use with Air Force Station 53-M 010 only Rugged and convenient sprayers designed to effectively dispensea variety of Walter cleaners, lubricants and
splicing products.
Contents: 30 fl.oz (900 ml)
Air Force
TM Air only Refilling Station Ordering Information
For use with Slap Shot, Slap Shot PL and Bolt-out DescriptionOrder No. For Spatter Block and Spatter Block HT53-L 101
SPECIFICATIONS
For Slap Shot PL, Bio Clean and X Force53-L 120 Minimum pressure: 80 psi
Maximum pressure: 200 psi
With Industrial Pump Sprayer Accessories
1/4 " female NPT fitting DescriptionOrder No. Order No. 53-M 010 Replacement Viton gasket set53-L 100Replacement
aerosol nozzle (without gaskets)53-L 104
Air Force AccessoriesOrder No.
Replacement swirl piece (without gaskets)53-L 114 Replacement
valve specifications kit53-M 030Brass ring53-M 037
Cap53-M 036
Air nozzle for pressurizing of sprayers with
1/4 " female NPT fitting53-M 0152" NPT drum intake adaptor with vent53-M 038
Air Force 20L adaptor53-M 041
Replacement valve for Slap Shot sprayers53-M 040
Replacement valve for Slap Shot PL and Bolt-out sprayers53-M 039
Valve cap for sprayers 53-M 101 and 53-M 12253-M 046
Wide spray nozzle53-M 022
Atomizer with long extension tube53-M 052
Nozzle with short extension tube53-M 053
Refillable Trigger Sprayer Bottles
Practical and sturdy, all bottles are clearly identified withproduct specific labels showing product features, WHMIS
information and directions for use.
Ordering Information
DescriptionOrder No. Gold Matrix, High Strength, 500 ml53-L 315
Gold Matrix, High Strength, 950 ml53-L 158
Gold Matrix All Purpose, 500 ml53-L 317
Stainless Shine, 500 ml53-L 316
Slap Shot, 500 ml53-L 311
Slap Shot PL, 500 ml53-L 312
Bio Clean, 500 ml53-L 313
X Force, 500 ml53-L 314
Bolt-out, 500 ml53-L 332
Hang-on, 500 ml53-L 331
Spatter Block HT, 500 ml53-L 320
Provides extra protection on parts and cleaning equipment. Use only
with GOLD MATRIX HIGH STRENGTH cleaning solution. ? Non-flammable, non-corrosive
Ordering Information
DescriptionSizeOrder No. MSDS Liquid950 ml53-G 001L-56E Spatter Block, 500 ml53-L 321
35