• Products
  • Catalogues
  • Projects
  • News & Trends
  • Exhibitions

Rental-Tools - 16 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

  10. P. 10

Catalogue excerpts


 Open the catalogue to page 1

O.D. Mounted Machine Tools - Pipe Ranges ½in SDSF 2.0 SDSF 3.0 SDSF 4.0 SDSF 5.0 SDSF 6.0 LCSF 206 LCSF 408 LCSF 610 LCSF 612 LCSF 814 LCSF 1016 LCSF 1420 LCSF 1824 LCSF 2228 LCSF 2632 LCSF 3036 LCSF 3642 LCSF 4248 DYNAPREP MDSF 612 MDSF 814 MDSF 1016 MDSF 1218 MDSF 1420 MDSF 1824 HDSF 1224 HDSF HDSF 2436 HDSF 3648 HDSF 4860 HDSF 6072 HDSF 7284 LDSF LDSF 75 LDSF 90 LDSF 105 MODEL E (PNEUMATIC) MODEL HE (HYDRAULIC) SUPER C MODEL D SUPER D GOLIATH | 600 KNIGHTSBRIDGE PARKWAY | LINCOLNSHIRE, ILLINOIS 60069 | T:+1.847.537.8800 | F:+1.847.520.1147 | SALES@EHWACHS.COM | ehwachs.com

 Open the catalogue to page 2

SDSF Small Diameter Split Frame The Small Diameter Split Frame (SDSF) is an externally mounted machine tool for cutting, beveling, and counterboring pipe from 0.5in to 6in (ND15-150) diameter. The SDSF is also capable of performing socket weld removal and chipless wheel cutting. Lightweight and flexible, the SDSF is optimized for low clearance environments. It offers simple setup and operation, featuring a self-squaring clamping system for precise cutting results typically available only with fixed machine tools. The SDSF operates on air or electric power using standard Wachs motors and adapters....

 Open the catalogue to page 3

LCSF Low Clearance Split Frame The Low Clearance Split Frame (LCSF) is ideal for all types of pipe cutting and end-prepping. The split frame machines can be split in half or ‘broken open, then bolted back together. This allows them to open and mount around the O.D. of in-line piping, or slipped over open-ended pipe. The LCSF has been engineered to apply precise, consistent square cuts and bevels on pipe, tube and casing the first time, every time. Using a split frame is a safe, clean operation that neither affects the metallurgical qualities of the pipe nor places airborne contaminants into the...

 Open the catalogue to page 4

HDSF Heavy Duty Split Frame HDSF Heavy Duty Split Frame clamshell style machines are the largest and most rugged in the Wachs split frame family, and are designed to cut, bevel, single point, counterbore and face flanges on large diameter pipes from 12in to 84in O.D. (DN300-2100). Designed for parting and beveling of larger diameter pipelines in the field, the HDSF series is constructed with a bigger cross section, larger gear sets and massive hardened steel components. HDSF MODELS MODEL High Speed Steel High Speed Steel SINGLE POINT High Speed Steel For use with Single Point slide, compound bevel...

 Open the catalogue to page 5

LDSF Large Diameter Split Frame E.H. Wachs LDSF Large Diameter Split Frame is designed for cold cutting, beveling, facing and counterboring on large diameter pipes, vessels and flanges. It’s been engineered to incorporate multiple advancements designed to make it stronger, faster to set up, faster to operate and even more versatile than our class leading HDSF models. Picking up where our midsize split frames leave off, four standard LDSF sizes will cover a range from 60in to 120in OD (DN1500DN3000). LDSF MODELS MODEL High Speed Steel LDSF LARGE DIAMETER SPLIT FRAME High Speed Steel SINGLE POINT High...

 Open the catalogue to page 6

TRAV-L-CUTTER Pipe Saw The Wachs Trav-L-Cutter is a portable milling machine capable of cold cutting and beveling simultaneously on all machinable pipe materials, pipe schedules and pipe sizes from OD 6in - 72in (152.4 - 1829 mm). Mounted by its own tensioning chain, the Trav-L-Cutter drives itself around the pipe as it machines. For larger diameter pipe or vessels, simply add more drive chain sections. For greater accuracy specify the Trav-L-Cutter Guide Track. Available in pneumatic and hydraulic drive options. TRAV-L-CUTTER MODELS MODEL AVAILABLE BLADE TYPES MODEL E (PNEUMATIC) SLITTING BLADE BEVEL...

 Open the catalogue to page 7

GUILLOTINE Pipe Saw E.H. Wachs family of portable Guillotine® pipe saws are designed to cold cut 2in - 32in (DN 50 - 800) pipe, as well as solids such as bar stock, rails and beams. Their compact design and easy setup make it the ideal saw for contractors, pipeline operations, refineries, petrochemical and processing plants and anywhere a fast, safe cut is needed. In use virtually everywhere, they’re strong yet light, simple to mount, simple to operate and simply bulletproof. It’s no wonder that when pipe saws are first mentioned, the “Wachs Saw” is mentioned first. GUILLOTINE SUPER C GUILLOTINE...

 Open the catalogue to page 8

I.D. Mounted Machine Tools ½in SDB SMALL DIAMETER BEVELER | 600 KNIGHTSBRIDGE PARKWAY | LINCOLNSHIRE, ILLINOIS 60069 | T:+1.847.537.8800 | F:+1.847.520.1147 | SALES@EHWACHS.COM | ehwachs.com

 Open the catalogue to page 9

EP 424 Pipe End Prep The Wachs EP 424 with the patented new SpeedPrep feed system is a precision ID mount end prep machine tool designed to bevel, compound bevel, J prep, face and counterbore pipe, fittings and valves. Able to machine any bevel or compound bevel without templates, incline tool slides or work stoppage. The EP 424 is powerful enough to form tool from 4in - 14in (DN 100 - 350) and single point from 8in - 24in (DN 200 - 600) up to a 6.5in (165 mm) wall thickness. Form Tool Single Point EP 424 SINGLE POINT MODEL EP 424 FORM TOOL MODEL FACING TOOL INSERT HOLDER (HIGH RANGE) Cross section...

 Open the catalogue to page 10

SDB Small Diameter Beveler E.H. Wachs® SDB line of small diameter bevelers have been engineered for fast, precise onsite facing, beveling, compound beveling and counterboring of light and heavy wall pipe, tube or casing. Proven workhorses, they set up quickly with a self centering mandrel and chuck assembly mounting to the pipe I.D. Their highly productive design means one person can setup, operate and create a perfect weld prep in minutes. SDB BEVELER MODELS MODEL SDB 103/3 PIPE END PREP BEVELER Face, bevel and counterbore simultaneously on carbon, stainless and high alloy steels. Machine boiler...

 Open the catalogue to page 11

FF Flange Facer Now anyone can produce a lathe quality surface finish on flat, raised or recessed face flanges in minutes. Based on the powerful Wachs SDB series ID mount end prep machines, the Wachs FF series flange facers offer a rugged yet lightweight and compact design that allows them to fit into tight quarters. With the addition of the SDB conversion kit, the FF models can be converted into SDB series machines, allowing them to face, bevel, compound bevel and counterbore. FF FLANGE FACER MODELS MODEL Cuts lathe quality surface finishes on flat and raised face flanges in minutes (Record Groove,...

 Open the catalogue to page 12

All WACHS catalogues and technical brochures

  1. Nuclear

    8 Pages

  2. CSF-1220-Bridge

    86 Pages

  3. HDSF-7284-

    2 Pages

  4. DSF-30

    2 Pages

  5. DSF-10

    2 Pages

  6. subsea

    9 Pages

  7. Rental tools

    7 Pages

  8. utility brochure

    13 Pages


Archived catalogues

  1. Utility Vac

    2 Pages

  2. ERV-750™

    3 Pages

  3. Trav-L-Vac 300

    2 Pages