Magnetic incremental encoder WDG 24C - Wachendorff Automation GmbH & Co - #2

Small electric motors, automated guided vehicle systems (AGVS), storage technology, drive systems, assembly systems.

Housing

- Synchro flange:

- Rear:

Shaft

- Material:

- Permitted load on shaft end:

- Starting torque:

Bearings

- Type:

- Service life:

1 ... 128, 256, 512, 1024

Aluminium Aluminium

stainless steel max. 80 N radial max. 50 N axial

approx. 0.2 Ncm at ambient temperature

2 precision ball bearings -0,55 x 10⁹ U revs. at 100% of full rated shaft load 8,5 x 10¹⁰U revs. at 40 % 6,8 x 10¹¹ U revs. at 20 %

12.000 rpm approx. 50 g cable or connector outlet

IP65 all-round, optional IP67 all-round

-40 °C up to +80 °C

-40 °C up to +80 °C

magnetic 90° ± 10 %

50 % ± 10 %

Max. operating speed: Weight: Connections:

Protection rating (EN 60529):

Operating temperature: Storage temperature:

Scanning:

Phase offset: Pulse/pause ratio:

All specifications in mm.

The encoder WDG24A can be supplied with more than 2 m of cable. The max. permissible cable length is 10 metres with the output circuit M05 and M24. With output circuit M30 max. 25 m.

The encoder WDG 24A can be supplied in a full IP67 version. When ordering please add the suffix code - AAO.

Measured mounted and housing grounded. ESD (DIN EN 61000-4-2): 8 kV

Burst (DIN EN 61000-4-4): 2 kV Vibration: (DIN EN 60068-2-6) 50 m/s2 (10 bis 2000 Hz)

Shock: (DIN EN 60068-2-27) 1000 m/s2 (6 ms) Electrical Data

Amended specifications for shaft sealed to IP67.

* up to 64 PPR

M24 M05 M30

View from shaft end, rotating clockwise

Matching accessories on www.wachendorff-automation.com/acs

Any Questions? Just call Tatjana Weigelt +49 (0) 6722/9965-25, send her an E-Mail at tw@wachendorff.de or call your local distributor.

Please contact your local distributor:

Wachendorff Automation GmbH & Co. KG Industriestrasse 7 • D-65366 Geisenheim

Phone: +49 (0) 67 22 / 99 65 - 25 Fax: +49 (0) 67 22 / 99 65 - 70 E-Mail: wdg@wachendorff.de www.wachendorff-automation.com