Wachendorff Encoder WDG 100H - 12 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

  10. P. 10

Catalogue excerpts

Wachendorff Automation ... systems and encoders • Complete systems • Industrial rugged encoders to suit your application • Standard range and customer versions • Maximum permissible loads • 48-hour express production • Made in Germany • Worldwide distributor network WDG 100H Errors and modifications reserved. © Wachendorff Automation GmbH & Co. KG 2015-05-05 -1-

 Open the catalogue to page 1

Encoder WDG 100H • Rugged and extremely thin thru-bore encoder for extension on power motors • Thru-Bore, bore size max. 45 mm • Full connection protection with 10 VDC up to 30 VDC • Easy mounting • Meets protection class IP54 • Up to 20,480 PPR • Optional: -40 °C up to +80 °C Protection to IP55 all around www.wachendorff-automation.com/wdg100h Resolution Max. pulses per revolution PPR Mechanical Data Housing Flange Flange material Housing cap Torque supports - 1. Spring plate compensation Housing hollow shaft (through-bored) aluminium aluminium, powder coated incl. 1 torque support WDGDS10001...

 Open the catalogue to page 2

Max. Permissible shaft loading radial Max. Permissible shaft loading axial Bearings Bearings type Nominale service life 2 precision ball bearings 3 x 10'10 revs. at 100 % rated shaft load 1 x 10'11 revs. at 40 % rated shaft load 1 x 10'12 revs. at 20 % rated shaft load 3500 rpm Machinery Directive: basic data safety integrity level MTTFd 200 a Mission time (TM) 25 a Nominale service life (L10h) 1 x 10'12 revs. at 20 % rated shaft load and 3500 rpm Diagnostic coverage (DC) 0% Electrical Data Power supply/Current consumption Power supply/Current consumption Power supply/Current consumption Output...

 Open the catalogue to page 3

Cable connection K3, L3 with 2 m cable radial, shield not connected radial, shield connected to encoder housing Assignments Circuit GND (+) Vcc A B N Light reserve warning A inv. B inv. N inv. Shield WDG 100H Errors and modifications reserved. © Wachendorff Automation GmbH & Co. KG 2015-05-05 -4-

 Open the catalogue to page 4

radial, 5-pin, Connector connected to encoder housing radial, 6-pin, Connector connected to encoder housing radial, 8-pin, Connector connected to encoder housing SH12 radial, 12-pin, Connector connected to encoder housing Assignments SH5 5-pin GND (+) Vcc A B N Light reserve warning A inv. B inv. N inv. n. c. Shield WDG 100H Errors and modifications reserved. © Wachendorff Automation GmbH & Co. KG 2015-05-05 -5-

 Open the catalogue to page 5

radial, 7-pin, Connector connected to encoder housing GND (+) Vcc A B N Light reserve warning A inv. B inv. N inv. n. c. Shield WDG 100H Errors and modifications reserved. © Wachendorff Automation GmbH & Co. KG 2015-05-05 -6-

 Open the catalogue to page 6

radial, 12-pin, Connector connected to encoder housing GND (+) Vcc A B N Light reserve warning A inv. B inv. N inv. n. c. Shield WDG 100H Errors and modifications reserved. © Wachendorff Automation GmbH & Co. KG 2015-05-05 -7-

 Open the catalogue to page 7

radial, 12-pin, Connector connected to encoder housing GND (+) Vcc A B N Light reserve warning A inv. B inv. N inv. n. c. Shield WDG 100H Errors and modifications reserved. © Wachendorff Automation GmbH & Co. KG 2015-05-05 -8-

 Open the catalogue to page 8

radial, 4-pin, Connector connected to encoder housing radial, 5-pin, Connector connected to encoder housing radial, 8-pin, Connector connected to encoder housing GND (+) Vcc A B N Light reserve warning A inv. B inv. N inv. n. c. Shield WDG 100H Errors and modifications reserved. © Wachendorff Automation GmbH & Co. KG 2015-05-05 -9-

 Open the catalogue to page 9

The encoder WDG 100H with the output circuit types F24, H24, P24, R24, F05, H05, P05, ACA R05, 245, 645 is also available with the extended temperature range -40 °C up to +80 °C (measured at the flange). Cable length The encoder WDG 100H can be supplied with more than 2 m cable. The maximum cable length depends on the supply voltage and the frequency; see www.wachendorffautomation.com/atd Please extend the standard order code with a three figure number, specifying the cable length in decimetres. Example: 5 m cable = 050 The encoder WDG 100H can be supplied in a full IP55 version. Max. RPM: 1500...

 Open the catalogue to page 10

Example Order No. Type WDG 100H Your encoder Output circuit HTL HTL inverted TTL TTL, RS422 comp., inverted HTL HTL inverted TTL, RS422 comp., inverted TTL TTL, RS422 comp., inverted HTL HTL inverted TTL, RS422 comp., inverted 1 Vpp sin/cos 1 Vpp sin/cos Light reserve warning • - Electrical connections Description Cable: length (2 m standard, WDG 58T: 1 m) radial, shield not connected radial, shield connected to encoder housing Connector: (shield connected to encoder housing) connector, M16x0.75, 5-pin, radial connector, M16x0.75, 6-pin, radial connector, M16x0.75, 8-pin, radial connector, M16x0.75,...

 Open the catalogue to page 11

For further information please contact our local distributor. Here you find a list of our distributors worldwide. http://www.wachendorff-automation.com/distributors_worldwide.html WDG 100H Errors and modifications reserved. © Wachendorff Automation GmbH & Co. KG 2015-05-05 -12-

 Open the catalogue to page 12

All Wachendorff Automation GmbH & Co. KG catalogues and technical brochures

  1. WDGA 58A CANopen

    8 Pages

    En
  2. WDGI 58N

    18 Pages

    En
  3. WDG 40A

    11 Pages

    En
  4. WDG 40S

    11 Pages

    En
  5. WDG 70B

    14 Pages

    En
  6. WDG 63Q

    14 Pages

    En
  7. WDG 63B

    14 Pages

    En
  8. WDG 58K

    14 Pages

    En
  9. WDG 58H

    13 Pages

    En
  10. WDG 58D

    14 Pages

    En
  11. WDG 58C

    14 Pages

    En
  12. WDG 115M

    14 Pages

    En
  13. WDG 58E

    13 Pages

    En
  14. WDG 58B

    14 Pages

    En
  15. WDG 58A

    14 Pages

    En
  16. Encoder WDGI 58K

    18 Pages

    En

Archived catalogues