GES Encoder Catalogue
84Pages

{{requestButtons}}

Catalog excerpts

GES Encoder Catalogue - 1

PRODUCT CATALOGUE Incremental Encoders Absolute Encoders Multiturn Encoders Harsh & Harzardous Area Encoders Special Function Encoders Commutation Encoders Accessories

Open the catalog to page 1
GES Encoder Catalogue - 3

INCREMENTAL ENCODERS ABSOLUTE ENCODERS MULTITURN ENCODERS HARSH & HAZARDOUS AREA ENCODERS SPECIAL FUNCTION ENCODER COMMUTATION ENCODERS MECHANICAL INSTALLATION

Open the catalog to page 3
GES Encoder Catalogue - 4

Incremental Encoders are the most common types used in the industry due to the simplicity of their use. Each encoder is comprised of an optical disc with the required number of lines together with an (HRS) reading system coupled with a single L.E.D. for longer life, reliability and enhanced performance. Either speed or relative position can be determined by monitoring the frequency or the number of pulses generated by the encoder.

Open the catalog to page 4
GES Encoder Catalogue - 5

stainless steel stainless steel stainless steel A+B+O A+B+O+Complim. A+B+O A+B+O+Complim. A+B+O A+B+O+Complim. A+B+O A+B+O+Complim. A+B+O A+B+O+Complim. A+B+O A+B+O+Complim. A+B+O A+B+O+Complim.

Open the catalog to page 5
GES Encoder Catalogue - 6

INCREMENTAL SHAFT ENCODER Micro Miniature Size 1024 PPR Maximum 4.75 to 30 Volts, RS 422A Compatible 100 kHz Maximum Frequency ELECTRICAL SPECIFICATIONS A Leads B in the CW Direction (facing shaft) Complimentary channel also available

Open the catalog to page 6
GES Encoder Catalogue - 7

Drawing available as: dxf, iges, step, sld file ORDERING CODE a b c d e f g h Pulses Per Revolution a Group Function IS=Incremental Solid Shaft b Basic Series Number 240 c Shaft Size D 06=6 mm d Mechanical Options 0 = None Note: Special functions and designs will be designated by a 4 digit code at the end of the part number. Consult factory for further details e Connector Type 0=2 mtr. Cable f Connector Location A=Axial g Output Signals 3=A+B+0 6=A+B+0+Compliments h Output Circuit Type 3=Push Pull 4.75 to 30 VDC Function Cable Colour Code white brown green yellow grey pink blue red

Open the catalog to page 7
GES Encoder Catalogue - 8

□ □□□□□□□□□a IS 280 INCREMENTAL SHAFT ENCODER Micro Miniature Size 1024 PPR Maximum 4.75 to 30 Volts, RS 422A Compatible 100 kHz Maximum Frequency ELECTRICAL SPECIFICATIONS A Leads B in the CW Direction (facing shaft) Complimentary channel also available

Open the catalog to page 8
GES Encoder Catalogue - 9

Drawing available as: dxf, iges, step, sld file Ø 28.0 ORDERING CODE Group Function IS=Incremental Solid Shaft Connector Type 0=2 mtr. Cable Basic Series Number 280 Connector Location A=Axial Output Circuit Type 3=Push Pull 4.75 to 30 VDC Note: Special functions and designs will be designated by a 4 digit code at the end of the part number. Consult factory for further details Cable Colour Code

Open the catalog to page 9
GES Encoder Catalogue - 10

INCREMENTAL SHAFT ENCODER Miniature Size IP65 Protection Syncro Flange Mounting 10000 PPR Maximum 4.75 to 30 Volts, RS 422 Compatible 100 kHz Maximum Frequency ELECTRICAL SPECIFICATIONS A Leads B in the CW Direction (facing shaft) Complimentary channel also available

Open the catalog to page 10
GES Encoder Catalogue - 11

Drawing available as: dxf, iges, step, sld file ORDERING CODE a b c d e f g h Pulses Per Revolution a Group Function IS=Incremental Solid Shaft b Basic Series Number 410 c Shaft Size D 06=6 mm d Mechanical Options 0 = None Note: Special functions and designs will be designated by a 4 digit code at the end of the part number. Consult factory for further details e Connector Type 0=2 mtr. Cable f Connector Location A=Axial R=Radial g Output Signals 3=A+B+0 6=A+B+0+Compliments h Output Circuit Type 3=Push Pull 4.75 to 30 VDC Function Cable Colour Code grey pink blue

Open the catalog to page 11
GES Encoder Catalogue - 12

□ □□□□□□□□□a IS 580 INCREMENTAL SHAFT ENCODER Industry Standard Size 25 Syncro Flange Mounting 25000 PPR (Maximum) 4.75 to 30 Volts, RS 422 Compatible 300 kHz Maximum Frequency A Leads B in the CW Direction (facing shaft) Optional Gated Marker Pulse Complimentary channel also available Gated with A+B Shown

Open the catalog to page 12
GES Encoder Catalogue - 13

Drawing available as: dxf, iges, step, sld file ORDERING CODE a b c d e f g h Pulses Per Revolution a Group Function IS=Incremental Solid Shaft b Basic Series Number 580 c Shaft Size D 06=6 mm 10=10 mm d Mechanical Options 0 = None 2=Steel Cover Note: Special functions and designs will be designated by a 4 digit code at the end of the part number. Consult factory for further details e Connector Type 0=2 mtr. (6ft.) Cable 7=12 Pin f Connector Location A=Axial R=Radial g Output Signals 3=A+B+0 6=A+B+0+Compliments h Output Circuit Type 3=Push Pull 4.75 to 30 VDC Colour Code Connector...

Open the catalog to page 13
GES Encoder Catalogue - 14

INCREMENTAL SHAFT ENCODER Industry Standard Size 25 IP65 Protection 25000 PPR Maximum 4.75 to 30 Volts, RS 422 Compatible 300 kHz Maximum Frequency A Leads B in the CW Direction (facing shaft) Optional Gated Marker Pulse Complimentary channel also available Gated with A+B Shown

Open the catalog to page 14
GES Encoder Catalogue - 15

IS 581 - - a b c d e f g h Pulses Per Revolution a Group Function IS=Incremental Solid Shaft b Basic Series Number 581 c Shaft Size D 06=6 mm 08=8 mm 10=10 mm AA=1/4” AB=3/8” d Mechanical Options 0 = None Note: Special functions and designs will be designated by a 4 digit code at the end of the part number. Consult factory for further details e Connector Type 0=2 mtr. (6ft.) Cable, 4=6 Pin Mil, 5=7 Pin Mil, 7=12 Pin, 9=10 Pin Mil f Connector Location A=Axial R=Radial g Output Signals 3=A+B+0 6=A+B+0+Compliments h Output Circuit Type 3=Push Pull 4.75 to 30 VDC Cable 12 Pin Colour...

Open the catalog to page 15
GES Encoder Catalogue - 16

Heavy Duty Construction IP65 Protection 25000 PPR Maximum 4.75 to 30 Volts, RS 422 Compatible 300 kHz Maximum Frequency A Leads B in the CW Direction (facing shaft) Optional Gated Marker Pulse Complimentary channel also available Gated with A+B Shown

Open the catalog to page 16
GES Encoder Catalogue - 17

Drawing available as: dxf, iges, step, sld file ORDERING CODE a b c d e f g h Pulses Per Revolution a Group Function IS=Incremental Solid Shaft b Basic Series Number 700 c Shaft Size D 10=10 mm 12=12 mm AB=3/8” AC=1/2” d Mechanical Options 0=None Note: Special functions and designs will be designated by a 4 digit code at the end of the part number. Consult factory for further details e Connector Type 0=2 mtr. (6ft.) Cable 7=12 Pin f Connector Location A=Axial R=Radial g Output Signals 3=A+B+0 6=A+B+0+Compliments h Output Circuit Type 3=Push Pull 4.75 to 30 VDC Colour Code Connector...

Open the catalog to page 17
GES Encoder Catalogue - 18

INCREMENTAL SHAFT ENCODER Heavy Duty Construction IP65 Protection (Optional IP 66) 25000 PPR Maximum 4.75 to 30 Volts, RS 422 Compatible 300 kHz Maximum Frequency A Leads B in the CW Direction (facing shaft) Optional Gated Marker Pulse Complimentary channel also available Gated with A+B Shown

Open the catalog to page 18

All W+S Meßsysteme GmbH catalogs and technical brochures

  1. CH840

    2 Pages

  2. CH580

    2 Pages

  3. CH410

    2 Pages

  4. MH750

    2 Pages

  5. MS650

    2 Pages

  6. AH740

    2 Pages

  7. AH580

    2 Pages

  8. AS900

    2 Pages

  9. AS580

    2 Pages

  10. IH581

    2 Pages

  11. IH490

    2 Pages

  12. IH360

    2 Pages

  13. IS581

    2 Pages

  14. IS580

    2 Pages

  15. IS410

    2 Pages

  16. IS280

    2 Pages

  17. IS240

    2 Pages

  18. IH120

    2 Pages

  19. IP700

    2 Pages

  20. IS 280

    2 Pages

  21. IS 240

    2 Pages