GES Encoder Catalogue - 84 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

  10. P. 10

  11. P. 20

  12. P. 30

  13. P. 40

  14. P. 50

  15. P. 60

  16. P. 70

  17. P. 80

Catalogue excerpts

PRODUCT CATALOGUE Incremental Encoders Absolute Encoders Multiturn Encoders Harsh & Harzardous Area Encoders Special Function Encoders Commutation Encoders Accessories

 Open the catalogue to page 1

INCREMENTAL ENCODERS ABSOLUTE ENCODERS MULTITURN ENCODERS HARSH & HAZARDOUS AREA ENCODERS SPECIAL FUNCTION ENCODER COMMUTATION ENCODERS MECHANICAL INSTALLATION

 Open the catalogue to page 3

Incremental Encoders are the most common types used in the industry due to the simplicity of their use. Each encoder is comprised of an optical disc with the required number of lines together with an (HRS) reading system coupled with a single L.E.D. for longer life, reliability and enhanced performance. Either speed or relative position can be determined by monitoring the frequency or the number of pulses generated by the encoder.

 Open the catalogue to page 4

stainless steel stainless steel stainless steel A+B+O A+B+O+Complim. A+B+O A+B+O+Complim. A+B+O A+B+O+Complim. A+B+O A+B+O+Complim. A+B+O A+B+O+Complim. A+B+O A+B+O+Complim. A+B+O A+B+O+Complim.

 Open the catalogue to page 5

INCREMENTAL SHAFT ENCODER Micro Miniature Size 1024 PPR Maximum 4.75 to 30 Volts, RS 422A Compatible 100 kHz Maximum Frequency ELECTRICAL SPECIFICATIONS A Leads B in the CW Direction (facing shaft) Complimentary channel also available

 Open the catalogue to page 6

Drawing available as: dxf, iges, step, sld file ORDERING CODE a b    c d e f g h    Pulses Per Revolution a Group Function IS=Incremental Solid Shaft b Basic Series Number 240 c Shaft Size D 06=6 mm d Mechanical Options 0 = None Note: Special functions and designs will be designated by a 4 digit code at the end of the part number. Consult factory for further details e Connector Type 0=2 mtr. Cable f Connector Location A=Axial g Output Signals 3=A+B+0 6=A+B+0+Compliments h Output Circuit Type 3=Push Pull 4.75 to 30 VDC Function    Cable Colour Code white brown green yellow grey pink blue red

 Open the catalogue to page 7

□ □□□□□□□□□a IS 280 INCREMENTAL SHAFT ENCODER Micro Miniature Size 1024 PPR Maximum 4.75 to 30 Volts, RS 422A Compatible 100 kHz Maximum Frequency ELECTRICAL SPECIFICATIONS A Leads B in the CW Direction (facing shaft) Complimentary channel also available

 Open the catalogue to page 8

Drawing available as: dxf, iges, step, sld file Ø 28.0 ORDERING CODE Group Function IS=Incremental Solid Shaft Connector Type 0=2 mtr. Cable Basic Series Number 280 Connector Location A=Axial Output Circuit Type 3=Push Pull 4.75 to 30 VDC Note: Special functions and designs will be designated by a 4 digit code at the end of the part number. Consult factory for further details Cable Colour Code

 Open the catalogue to page 9

INCREMENTAL SHAFT ENCODER Miniature Size IP65 Protection Syncro Flange Mounting 10000 PPR Maximum 4.75 to 30 Volts, RS 422 Compatible 100 kHz Maximum Frequency ELECTRICAL SPECIFICATIONS A Leads B in the CW Direction (facing shaft) Complimentary channel also available

 Open the catalogue to page 10

Drawing available as: dxf, iges, step, sld file ORDERING CODE a b    c d e f g h    Pulses Per Revolution a Group Function IS=Incremental Solid Shaft b Basic Series Number 410 c Shaft Size D 06=6 mm d Mechanical Options 0 = None Note: Special functions and designs will be designated by a 4 digit code at the end of the part number. Consult factory for further details e Connector Type 0=2 mtr. Cable f Connector Location A=Axial R=Radial g Output Signals 3=A+B+0 6=A+B+0+Compliments h Output Circuit Type 3=Push Pull 4.75 to 30 VDC Function    Cable Colour Code grey pink blue

 Open the catalogue to page 11

□ □□□□□□□□□a IS 580 INCREMENTAL SHAFT ENCODER Industry Standard Size 25 Syncro Flange Mounting 25000 PPR (Maximum) 4.75 to 30 Volts, RS 422 Compatible 300 kHz Maximum Frequency A Leads B in the CW Direction (facing shaft)    Optional Gated Marker Pulse Complimentary channel also available    Gated with A+B Shown

 Open the catalogue to page 12

Drawing available as: dxf, iges, step, sld file ORDERING CODE a b    c d e f g h    Pulses Per Revolution a Group Function IS=Incremental Solid Shaft b Basic Series Number 580 c Shaft Size D 06=6 mm 10=10 mm d Mechanical Options 0 = None 2=Steel Cover Note: Special functions and designs will be designated by a 4 digit code at the end of the part number. Consult factory for further details e Connector Type 0=2 mtr. (6ft.) Cable 7=12 Pin f Connector Location A=Axial R=Radial g Output Signals 3=A+B+0 6=A+B+0+Compliments h Output Circuit Type 3=Push Pull 4.75 to 30 VDC Colour Code    Connector white...

 Open the catalogue to page 13

INCREMENTAL SHAFT ENCODER Industry Standard Size 25 IP65 Protection 25000 PPR Maximum 4.75 to 30 Volts, RS 422 Compatible 300 kHz Maximum Frequency A Leads B in the CW Direction (facing shaft)    Optional Gated Marker Pulse Complimentary channel also available    Gated with A+B Shown

 Open the catalogue to page 14

IS 581 -    - a b    c d e f g h    Pulses Per Revolution a Group Function IS=Incremental Solid Shaft b Basic Series Number 581 c Shaft Size D 06=6 mm 08=8 mm 10=10 mm AA=1/4” AB=3/8” d Mechanical Options 0 = None Note: Special functions and designs will be designated by a 4 digit code at the end of the part number. Consult factory for further details e Connector Type 0=2 mtr. (6ft.) Cable, 4=6 Pin Mil, 5=7 Pin Mil, 7=12 Pin, 9=10 Pin Mil f Connector Location A=Axial R=Radial g Output Signals 3=A+B+0 6=A+B+0+Compliments h Output Circuit Type 3=Push Pull 4.75 to 30 VDC Cable    12 Pin Colour Code...

 Open the catalogue to page 15

Heavy Duty Construction IP65 Protection 25000 PPR Maximum 4.75 to 30 Volts, RS 422 Compatible 300 kHz Maximum Frequency A Leads B in the CW Direction (facing shaft)    Optional Gated Marker Pulse Complimentary channel also available    Gated with A+B Shown

 Open the catalogue to page 16

Drawing available as: dxf, iges, step, sld file ORDERING CODE a b    c d e f g h    Pulses Per Revolution a Group Function IS=Incremental Solid Shaft b Basic Series Number 700 c Shaft Size D 10=10 mm 12=12 mm AB=3/8” AC=1/2” d Mechanical Options 0=None Note: Special functions and designs will be designated by a 4 digit code at the end of the part number. Consult factory for further details e Connector Type 0=2 mtr. (6ft.) Cable 7=12 Pin f Connector Location A=Axial R=Radial g Output Signals 3=A+B+0 6=A+B+0+Compliments h Output Circuit Type 3=Push Pull 4.75 to 30 VDC Colour Code    Connector white...

 Open the catalogue to page 17

All W+S Mess-Systeme GmbH catalogues and technical brochures

  1. CH840

    2 Pages

    En
  2. CH580

    2 Pages

    En
  3. CH410

    2 Pages

    En
  4. MH750

    2 Pages

    En
  5. MS650

    2 Pages

    En
  6. AH740

    2 Pages

    En
  7. AH580

    2 Pages

    En
  8. AS900

    2 Pages

    En
  9. AS580

    2 Pages

    En
  10. IH581

    2 Pages

    En
  11. IH490

    2 Pages

    En
  12. IH360

    2 Pages

    En
  13. IS581

    2 Pages

    En
  14. IS580

    2 Pages

    En
  15. IS410

    2 Pages

    En
  16. IS280

    2 Pages

    En
  17. IS240

    2 Pages

    En
  18. IH120

    2 Pages

    En
  19. IP700

    2 Pages

    En
  20. IS 280

    2 Pages

    En
  21. IS 240

    2 Pages

    En