Double Filter Type W-DF-4.222 - 4 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

Catalogue excerpts

Double Filter Type W-DF-4.222 Technical Data

 Open the catalogue to page 1

W-FILTER Quality Engineering Solutions INGENIEURBÜRO UND FERTIGUNG FÜR INDUSTRIEARMATUREN Double Filter Typ W-DF-4.222 (DN25 - DN50) - Technical Data Dimension 1: Drain screw (optional) 2: Vent screw Thread G1 ½ (Standard) for flange SAEJ518DN25-3 (optional) Hole Thread Filter Dimension model Flow rate* Q [l/min] B1 B2 *These specifications refer to the oil medium ISO VG 460 with a grade filtration of 25µm. Pressure loss Δp ca. 0.6bar at clean conditions.

 Open the catalogue to page 2

W-FILTER Quality Engineering Solutions INGENIEURBÜRO UND FERTIGUNG FÜR INDUSTRIEARMATUREN Description The filter is used to separate foreign particles from the particular medium (e.g. lubricating oil) and is designed for continuous filtration. As a rule one filter chamber is operating while the other one stands full of liquid and has a clean filter element in reserve. If the operating filter element is very soiled, you can manually switch to the reserve filter element. An overlapping changeover between the two filter chambers ensures a continuous media flow. After the changeover the soiled filter...

 Open the catalogue to page 3

W-FILTER Quality Engineering Solutions INGENIEURBÜRO UND FERTIGUNG FÜR INDUSTRIEARMATUREN Type Code The type code can be found on the type plate. W-DF 5.22- A50 . 060 . L2 - V . LR 4.222 2.0 5.222.0 deltaP® differential pressure indicator In their standard version the filters feature a differential pressure indicator type W-DP-5.22 (the designation can be found in the separate data sheet). Direction of flow Flow from right to left Flow from left to right (standard) Sealing material P NBR (standard) V FKM Other materials on request Installation length code Standard installation length all sizes...

 Open the catalogue to page 4

All W-FILTER catalogues and technical brochures