| VERSATILITY The LITEPIPE® assembly provides a method of transmitting the light from PCB mounted LEDs to the front display panel. Both styles of LEDs, surface mount, 3mm and 5mm standard packages can be displayed in this manner. BRIGHTNESS LITEPIPE® increases the apparent brightness and viewing angle of a PCB mounted LED. LITEPIPE® transmits the light from the source to the lens, which in turn disperses the light up to 180 degrees. APPLICATION The LITEPIPE® assembly meets NEMA 3 conditions for moisture and dust. Because there is no physical connection between the lightpipe and PCB mounted LED, the circuit board can be installed or removed without disturbing the panel display. INSTALLATION The LITEPIPE® and CLIPLITE® lens assembly is easily installed. Pass assembly through the panel opening and press on retaining ring to secure unit to the panel. Slide PCB into position aligning LED with the end of the LITEPIPE® unit. |