Viking Pump - Form445_Rev A - LVP Series Brochure
8Pages

{{requestButtons}}

Catalog excerpts

Viking Pump - Form445_Rev A - LVP Series Brochure - 1

Capacity to 36 M/Hr (160 GPM) Pressure to 14 Bar (200 PSI) Viscosity 0.1 to 500 cSt (28 to 2,300 SSU) Temperature -51 Ӱ C to +260 C (-60 а F to +500 F) > Е DIN Flanges, IEC B14 Motor Mount, Millimeter-Dimension Seals ANSI Flanges, NEMA C Motor Mount, Inch-Dimension Seals size="-1">

Open the catalog to page 1
Viking Pump - Form445_Rev A - LVP Series Brochure - 3

Viking's LVP pumps are designed for use with more than 200 thin liquids that are compatible with stainless steel, but cause unacceptable corrosion on cast iron. Chemical manufacturers and users that run many different liquids through their pumps, want the maximum practical corrosion protection, standard on the LVP series. The heavy-duty, one-piece, hardened stainless steel casing of the LVP pump series satisfies both the corrosion and thermal shock protection requirements for flammable liquids and liquefied gases in refineries or chemical manufacturing plants. The LVP series develops up to...

Open the catalog to page 3
Viking Pump - Form445_Rev A - LVP Series Brochure - 4

62 Rockwell C surfaced-hardened stainless steel casing. Solid-PEEK Extends pump life and lowers life-cycle cost. > ή plastic vanes and push rods. All non-metallic components minimize damage potential that is created by use of metal push rods and metal embedded plastic vanes. Extends casing and vane life, lowering life-cycle costs. > Hard silicon carbide sleeve bearing, standard. Extends pressure capability, minimizes wear, and lowers life-cycle costs. > Hardened chrome oxide coated shaft. > ADVANCED DURABILITY Contributes to industry leading pressure capabilities of 14 Bar (200 PSI), and...

Open the catalog to page 4
Viking Pump - Form445_Rev A - LVP Series Brochure - 5

Pump design provides superior vacuum capability and volumetric efficiency to deliver Bi-directional pumping design eliminates cost of second pump, piping, and valving needed for loading/unloading or line stripping. Provides application flexibility and reduces system costs. the same capacity on thin liquids as a stainless steel gear or screw pump, using less energy. Provides application flexibility and reduces life-cycle costs. > APPLICATION FLEXIBILITY Combination of Hardened 316 stainless steel casing, PEEK > vanes and push rods, and carbon construction provides broad chemical...

Open the catalog to page 5

All Viking Pump catalogs and technical brochures

  1. XPD Brochure

    7 Pages

  2. 4076, 4176

    8 Pages

Archived catalogs