| | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | Viking Mag Drive" Vi-Corr Pump For Special Sealing Needs If you are pumping expensive, EPA-regulated, or other liquids where you can't afford leakage, the Viking Mag Drive Vi-Corr Pump offers peace of mind. Vi-Corr Pumps with a Viking Mag Drive unit virtually eliminate the potential for leaks. ■ Eliminates mechanical seals assuring zero shaft leakage of hazardous or toxic liquids. ■ Eliminates electronic monitoring of EPA regulated fluids. | | |
| | | |
| | | Eliminates the high cost of mechanical seal maintenance and repair. Rare-earth magnetic material reduces magnet size. Sealless pump gives peace of mind for toxic applications. | | |
| | | Heres How It Works | | |
| | | The Viking Mag Drive Vi-Corr Pump is magnetically coupled to the driver. A magnetic force passes through a stainless steel canister to drive the inner coupling eliminating the need for shaft seals. Liquid is totally contained within the pump with no seals to wear out or replace. | | |
| | | |
| | | |
| | | |
| | | D5, and RP-805 PUMPS | | |
| | | |
| | | | | | | | | | | | | | | Snails | Bushings | ® Sftatl Seal | 0-Rlig | Internal Pressure Relief Valve | | | | | Hardened Stainless Steel | Carbon Graphite | ©Vrton* | ® Viton' | Stainless Steel | | | | | | | | | | | | | |
| | | |
| | | 05, and RP-805 PUMPS | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Tilnal city At J H I'M SSU) | Nominal Capacity At 1450 RPM (100 SSU) | Olsplacemenl | © Maximum Operating Conditions | t» Motor Selection | Approximate Pump Weight | | | | 1750 RPM | 1450 RPM | | | | Pressure | Temperature | Speed | | | | 50 PSI (3.5 BAR) | 100 PSI (7.0 BAR) | 50 PSI (3.5 BAR) | 100 PSI (7.0 BAR) | | | | l/MIN | GPM | L/MIK | IN' REV | CM II tv | PSI | ■ san | Degrees F. | Degrees C. | RPM | HP | KW | HP | KW | HP | KW | HP | KW | LBS | KG | | | | 2.3 | 0.5 | 1.9 | .094 | 1.54 | 20C | 14 | 200 | 95 | 1750 | Vb | 0.2 | - | | Vb | 0.2 | - | | 2.75 | 1.26 | | | | 3.8 | 0.8 | 3.2 | .139 | 2.27 | 200 | 14 | 200 | 95 | 1750 | Vs | 0.2 | V» | 0 2 | Vb | 0.2 | | 0 2 | 2.75 | 1.26 | | | | 5.3 | 1.2 | 4.4 | .194 | 3.18 | 200 | 14 | 200 | 95 | 1750 | | 0.2 | Vi | 0.2 | Vb | 0.2 | Vt | 0.2 | 2.75 | 1.26 | | | | 7.6 | 1.7 | 6.3 | .277 | 4.54 | 200 | 14 | 200 | 95 | 1750 | Vt | 0.2 | V4 | 0.2 | Vb | 0.2 | '/4 | 0.2 | 2.75 | 1.26 | | | | 10.6 | 2.3 | 8.8 | .388 | 6.36 | 200 | 14 | 200 | 95 | 1750 | '/4 | 0.2 | V4 | 04 | ' - | 0.2 | VS | 0.4 | 2.75 | 1.26 | | | | 15.1 | 3.3 | 12.5 | .548 | 8.98 | 200 | 14 | 200 | 95 | 1750 | '/4 | 0.2 | Vi | 0.4 | Va | 0.2 | VS | 0.4 | 2.75 | 1.26 | | | | 21.2 | 4.6 | 17.6 | .761 | 12.47 | 200 | 14 | 200 | 95 | 1750 | | 0.4 | % | 0.75 | V* | 0.4 | 'A | 0.4 | 2.75 | 1.26 | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | (*) Lip seal and mechanical seal also available in Buna-N and Teficn* (?) 1 BAR 0.1 MPa-lOOkPa-lO-'Pa. ® O-Ringsalso available m Buna-N and Teflon* ® Motor selection based on 150 SSU (30 CPS) o>\ and 5" Hg (127 mm Hg) suction ® Consult factory on applications exceeding maximum operating conditions asure Viton' and Tenon* - Registered tradenames ot the DuPont Company Ryton- — Registered tradename of Phillips Petroleum Company | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | |