Group: Verotec
Catalog excerpts
VEROTEC Electronics Packaging Thermal Solutions
Open the catalog to page 1Thermal Solutions – Value Added Services from Verotec… Custom Thermal Solutions (Fan Trays) TecServ+ is the vehicle by which Verotec delivers its value added services. These fall within 5 main categories and are described below. When it comes to thermal solutions, we’ve worked with many customers in the past to design, manufacture and help bring to market modified and custom versions of our standard products – a small selection of these are pictured below. If you have any special fan tray requirements, please contact our sales office. Engineering Services: Complete review of commercial,...
Open the catalog to page 2Standard Fan Trays 1U, 19” Standard fan trays 1U x 19” fan trays are designed as a cost effective solution, providing cooling as an integral part of the rack equipment. Designed to operate at fixed speeds, the fans offer good reliability and performance in high density applications, providing an even airflow across the full cabinet width. Available in 3-fan or 6-fan versions, the trays incorporate a computer-optimized vent pattern, providing 70% open-area material above the fan blades. The front panel is available either silver anodised with blue text or black smooth semi-gloss powder...
Open the catalog to page 3Filtered Fan Trays 1U, 19” Filtered fan trays Of similar size to the standard trays on the previous page, these versions incorporate low profile fans to allow a washable filter to be housed whilst maintaining the 1U rack height. The filter will lessen dust build up in the equipment being cooled and includes an extruded aluminium handle for easy removal. Available in 3-fan or 6-fan versions, the trays incorporate a computer-optimized vent pattern, providing 70% open-area material above the fan blades with an even larger aperture underneath for minimum resistance to air drawn through the...
Open the catalog to page 4Empty Fan Trays 1U, 19” Empty fan trays These fan trays are offered without fans fitted to allow different types / configurations of fans to be fitted. These are offered as AC versions comprising the tray & front panel with IEC inlet & Neon fitted and as DC versions with the Molex Mini fit Jr. and 10mA LED fitted. The fan trays are supplied with a rack fixing kit containing screws washers and cage nuts & and assembly leaflet. Standard fan trays are designed to accept 119 x 119mm fans with a maximum height of 38mm whilst filtered fan trays are designed to accept fans of 119 x 119 with a...
Open the catalog to page 5Intelligent Fan Trays The fan trays are designed to form part of a rack management system which will provide cooling in response to the thermal requirement of the rack whilst monitoring its component parts and providing a response to failure of either a fan or thermal sensor and providing a local and remote alarm. Designed as a 1U high (IEC 297-1) component for insertion adjacent to the equipment requiring cooling, positioning is normally below the item(s) to be cooled 1U integral height (to IEC 297-1). Forms part of a complete rack management system. Fan speed responsive to temperature....
Open the catalog to page 6Monitored Fan Trays & Plug-in Fan Modules PLUG-IN MODULES Some applications may only require the fans to run at full speed but have the facility to present an alarm on fan failure or power failure. This may be achieved by the use of an Intelligent Fan Tray fitted with a Dummy sensor for each group of 3 fans in place of the Thermal sensor. The Intelligent Fan Tray will not operate correctly without the required sensor(s) fitted. The plug in Fan module is designed to provide cooling as an integral part of an IEC 297-3 sub-rack system. The unit occupies a 3U 10HP space at 160mm or 220mm card...
Open the catalog to page 7Fan Trays Accessories Universal Air Ducting Trays Universal air ducting trays are compatible with standard, filtered, monitored and intelligent fantrays and indeed any industry standard 19” rack mounting fan tray. Occupying 1U of rack height, they can be used to isolate a hot spot within an equipment rack, ducting cool air into the rack and/or hot air from the rack without affecting the other mounted equipment. An airtight seal is assured between ducting tray and adjacent equipment / fan tray by a foam gasket around the tray edge. Supplied with 19” mounting hardware. ORDERING INFORMATION:...
Open the catalog to page 8All Verotec catalogs and technical brochures
-
BackPlanes And Extender Boards
12 Pages
-
CompactPCI Power Supplies
25 Pages
-
19in Racks & Accessories
33 Pages
-
19in Rack Cases
10 Pages
-
Enclosure Accessories
5 Pages
-
Introduction to KM6 Subracks
14 Pages
-
KM6-II Subracks
26 Pages
-
KM6 HD Subracks
15 Pages
-
KM6 Front Panels & Modules
23 Pages
-
Eurotec Caseframes
9 Pages
-
Diplomat Cases
21 Pages
-
VEROtec Cases
14 Pages
-
Total Access Cases
4 Pages
-
LBX Cases
4 Pages
-
19? Racks and Accessories
33 Pages
-
19" Rackcases
10 Pages
-
Power Supplies
32 Pages
-
Backplanes & Extender Boards
12 Pages
-
Integrated Systems
26 Pages
-
Compact PCI Power Supplies
25 Pages
-
26-Power
54 Pages
-
KM6 EC Subracks
4 Pages
-
Connectors to DIN 41612
8 Pages
-
KM6 RF Subracks
29 Pages
Archived catalogs
-
KM6 Caseframe
8 Pages