Detectors PM100/140™ Series - Verity Instruments, Inc. - #7

Text version of the page

In North America, call 1-972-446-9990 55 Specifications Model Number PM220 PM225 Type Bracket Mounted KF40 Flange Mounted Performance/Optics Range 185–830nm Resolution1 10nm FWHM Photomultiplier Tube 185–650nm (UV/VIS) 185–830nm (UV/VIS/NIR) (See page 6, Quantum Efficiency vs. Wavelength, for each PMT) Filter Diameter [inches (mm)] 0.5 (12.7) Min. Peak Transmittance 30% to 50% typical, depends on wavelength and bandpass Filter Blocking 0.01%, X-ray to 3.5ìm Temp. Coefficient of Center Wavelength 0.01 to 0.03nm/°C Temp. Coefficient at High Voltage 100ppm/°C typical Electronics Power2 +12 to +15VDC @ 7mA maximum (Two) –12 to –15VDC @ 1mA maximum (Two) Input Signal for PMT Gain2 2–10 VDC (Two) Output Signal2 0–10 VDC (Two) Mechanical Dimensions [inches (mm)] 3.56 (90.4) x 3.56 (90.4) x 4.3 (109.2) 9.0 (228.6) x 3.4 (86.4) x 4.3 (109.2) Window Quartz or Sapphire None Environmental Operating Temperature 5 to 50°C Storage Temperature –20 to 50°C Warm Up Time 10 minutes Safety Compliance CE and Semi S2-93 Compliant, Year 2000 (Y2K) not applicable 1 Alternate bandpass filters may be available on a specials basis. Consult factory. 2 A DAS-225 dual instrument card interface card, installed in a VM3000/3400, supports the power, input signals, and output signals. For OEM applications, the SDC2001 provides the same functionality. Outline Drawing PM220 PM225 15 PIN D-SUB CONNECTOR 3.56 [90.4] KF40 FLANGE 4.3 [109.2] 3.56 [90.4] 3.3 [83.8] 15 PIN D-SUB CONNECTOR MOUNTING BRACKET 4.74 [120.4] FIBER OPTIC COUPLER (2) 9.0 [228.6] 3.4 [86.4] 2.16 [54.9] 1.0 [25.4] 8.5 [215.9] 0.19 [4.8] DIA 0.58 [14.7] 0.22 [5.6] DIA. 0.98 [24.9] 2.0 [50.8] 4.3 [109.2] 2.23 [56.6]