Catalogue VPS Series Generator Sets for Power Generation and Cogeneration (CHP)
www.vericor.com
print switch display
Page / 2
Contact the
Manufacturer
Where to buy
this product ?
Request
a Quote
Vericor Power Systems - 87754, 3587, 3430, 5500, 4450, 3893, 3023
/ 2
See other catalogues for Vericor Power Systems
Text version of the page
VPS1-487 kW VPS3-3086 kW VPS4-3451 kW
VPS Series Generator sets
The heart of our generator sets are the reliable ASE™ aeroderivative gas turbines. Our engines originate from the time-tested Lycoming and Garrett gas turbines that have been in service for more than 30 years in a wide variety of industrial, military and commercial marine applications. A fleet of some 600 installations have logged more than 1.5 million operating hours. Our gas turbines feature a compact cold end drive design. A flexible on-condition maintenance plan assures high availability.
VPS Series Generator Set Specifications
Simple Cycle Performance*
VPS1
VPS3
VPS4
Output Power
kW
487
3,086
3,451
Heat Rate
Btu/kWh
16,754
12,704
12,047
KJ/kWh
17,676
13,403
12,709
Thermal Efficiency
(%)
20.4
26.9
28.3
Fuel Flow
Ib/h
397
1,908
2,023
kg/h
180
865
917
Heating Value (LHV)
Btu/lb
20,548
20,548
20,548
KJ/kg
47,786
47,786
47,786
Fuel Pressure
Psig
250/300
200/250
250/300
Required (min/max)
KPA
1,723/2,068
1,379/1,723
1,723/2,068
Exhaust Gas Flow
Ib/s
7.8
28.0
30.2
kg/s
3.56
12.7
13.7
Exhaust Gas
F
913
1,114
1,081
Temperature
C
489
601
583
Length (A)
ft
14.0
25.3
25.3
m
4.27
7.72
7.72
Height (B)
ft
14.1
20.0
20.0
m
4.29
6.10
6.10
Width (C)
ft
8.5
8 .6
8.6
m
2.59 m
2.64
2.64
* At 59 F, sea level, 60% relative humidity, 3"/4" inlet/exhaust losses, gear and generator losses included; operating on natural gas
VPS Series Scope of Supply
Standard Equipment Optional Equipment
ASE Series Gas Turbine
Gas Turbine Water Wash System
Epicyclic Reduction Gear Box (1800 RPM)
Epicyclic Reduction Gear Box (1500 RPM)
Generator (Synchronous,60Hz, 4160V, AC), WPII
Open Ventilated and Totally Enclosed Water-to-Air Cooled (TEWAC) Enclosures, 50 Hz, other Voltages, High Voltage Generator Switchgear
Natural Gas Fuel System
Distillate Fuel System, Dual Fuel System, Fuel Gas Conditioning Skid, Fuel Gas compressor, Water Injection System
Lube System (water cooled)
Electro Hydraulic Start System
Black Start System
Structural Steel Base, Weatherproof Acoustic Enclosure (Gas Turbine, Reduction Gearbox) with Ventilation Air System
No Enclosure, No Fire and Combustible Gas detection or Suppression Systems
Combustion Air Intake System (Barrier Filter)
Self Cleaning Filter, Chilling, Evaporative Cooling
Allen Bradley PLC
Generator Controls, MCC, HMI-Station,
Uninterruptible Power Supply (UPS), Control Room Building, Remote Control Interfaces
Exhaust Gas Diffuser and Expansion Metal bellows
Exhaust Silencer, Stack, Heat Recovery Industrial steam generator (20,000 - 65,000 lb/h)
About Vericor
Vericor, an MTU Aero Engines Company, based in Alpharetta, Georgia USA, provides power generation, mechanical drive and marine aero derivative gas turbine solutions for the industrial, oil and gas and marine marketplaces. Vericor is dedicated to being responsive, flexible and easy to work with while
Worldwide Support 24/7
Customer support is a key part of Vericor's product offerings. Dedicated and responsive customer support teams work to ensure reliable and cost-effective operation. Each customer is assigned a Customer Service Manager (CSM) who is responsible for all support needs 24 hours a day, seven days a week.
VERICOR
An MTU Aero Engines Company
Vericor Power Systems Inc.
3625 Brookside Parkway, Suite 500
Alpharetta, Georgia 30022 USA
Tel: (770) 569-8800 or (888) 547-4991
Fax: (770) 569-7524
e-mail: info@vericor.com www.vericor.com
providing quality, cost-effective solutions and services.
© 2004 Vericor Power Systems. All rights reserved. Printed in USA. Specifications subject to change without notice.
DirectIndustry's Virtual Technical Library: PDF Catalogue | Technical Documentation | Brochure | Manual | Industrial directory | Specifications | Characteristics
Search Go
page 1 p.1
page 2 p.2
pdf-page pdf di En 2008-12-49-03