| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | | | |
| | | applications | | |
| | | | | |
| | Velmex | , IMC. | | |
| | | |
| | | | | |
| | | |
| | | specifications Coefficient of Sliding Friction: 0.09 Cantilevered Loads: Equivalent center load= (dxF) +F d= distance from center (inches) F= Load (lbs) Minimum Motor Torque required: 25 in-oz Repeatability (short term): 0.0001" (0.0025mm) Straight Line Accuracy: 0.0017 10" (0.025mm/25cm) Screw Lead Accuracy: 0.003710" (0.076mm/25cm) Optional 0.0015710" available Operating Temperature: 0to180°F (-18to82°C) (Optional materials for wider temperature ranges available) Materials Base, Carriage, Cleats, Ends: Hard alloy aluminum Lead Screw: Nickel plated Steel or 303 SS Lead Screw Nut: Delrin AF Lead Screw Coupling: Steel | | |
| | | xyX | | |
| | | xz | | |
| | | xyz | | |
| | | Ж | | |
| | | |
| | | |
| | | |
| | | |
| | | maximum ratings | | |
| | | |
| | | | | | | | | | | | | | | Load | Dynamic | Static | Momentary | | | | | lb | kg | lb | kg | lb | kg | | | | Fw | 35 | 15.9 | 35 | 15.9 | 140 | 63.6 | | | | Ft1 | 10 | 4.5 | 20 | 9.1 | 120 | 54.5 | | | | Ft2 | 10 | 4.5 | 20 | 9.1 | 40 | 18.2 | | | | | | | | | | | | | | | in-lbs | N-m | in-lbs | N-m | in-lbs | N-m | | | | Fms | 32 | 3.6 | 65 | 7.3 | 125 | 14.0 | | | | Fmi | 22 | 2.5 | 45 | 5.0 | 88 | 9.9 | | | | | | | | | | | | | | |
| | | |
| | | |
| | | ordering information | | |
| | | |
| | | Maximum Load / Speed at 72° F Ambient | | |
| | | Y Design I0=lnch | | V | | |
| | | |
| | | T Options | | |
| | | 30 | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | \ | | 4 ч | 25c Hi I | fr. | | | | | | | | | | | 100 | | 50c Du | \ V \ | 33% Duty | | У | | | | | | | | | | | Dut | | | | 4 | | > | | | | | | | | | | | | | | | | ч | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | |
| | | | | | | | | | Lead Screw | Advance/Turn | | | | Blank | None | | | | M01 | 1.00 mm | | | | M02 | 2.00 mm | | | | E25 | 0.025 Inches | | | | E50 | 0.050 Inches | | | | E01 | 0.10 Inches | | | | E02 | 0.20 Inches | | | | E04 | 0.40 Inches | | | | | | | | | |
| | | |
| | | 25 | | |
| | | Cross Section X | | |
| | | <- Mounting Blank = None 11 = Basic Knob 70 = NEMA 17 Motor Mount 71 = NEMA 17 Mount & Lmt Swts 20 = NEMA 23 Motor Mount 21 = NEMA 23 Mounts Lmt Swts | | |
| | | |
| | | о | | |
| | | |
| | | |
| | | CU
| | 20 | | |
| | | |
| | | tt> "> CU | | |
| | | |
| | | 24" max speed VXM max speed 30" max speed 60" max speed | | |
| | | |
| | | | 15 | | |
| | | |
| | | "О cu S. 10 co | | |
| | | Version N = Nut/Screw Drive F = Free Sliding | | |
| | | |
| | | |
| | | |
| | | |
| | | Design Travel (Tenths of Inches) Standard travel lengths (Inches) 2,4,6,8,12,18,24,30 Other travels available: Screw Drive to 60': | | |
| | | |
| | | |
| | | Lifting (Ft) Sliding (Fw) | | |
| | | 1 10 | | 2 20 | | 4 6 35 - Load (lbs) | | 10 | | |
| | | |
| | | Free Sliding to 120,: | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | 800-642-6446 | | 1-3 | | 1-4 | | www.velmex.com | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |