| | | Tandem Option Carries Heavy Load Economically For higher loads and increased stiffness, the tandem option is an attractive solution for many applications. This configuration uses a standard motor-driven model mechanically attached to a free sliding model. The two bases are securely fastened together and the carriages are precision machined in place to insure flatness and parallelism. For more options visit our web site at www.bislide.com and www.velmex.com. | | |
| | | Choose the Parallel Coupled Assembly for Large and Long Traverses If your application calls for large loads or the ability to traverse long distances in two or three axes, the Parallel Coupled Assembly is what you need. It uses two identical BiSlide units. Motor driven models use a double shaft motor on one industrial slide and a bearing assembly on the other slide. A timing belt drive connects the two slides for synchronous operation. Manual versions have a bearing assembly on both slides; a hand wheel (knob/crank) drives the timing belt drive. Use our inexpensive cleats to mount your Parallel Coupled BiSlide Assembly to nearly any flat surface. For a free-standing assembly, BiSlides can be cleated to the T-slot plate or base structural profiles. Parallel systems are usually shipped unassembled to eliminate crating charges and trucking costs. These kits Include detailed assembly instructions, all fasteners, hardware, and come complete with a timing belt tensioner. They can be shipped fully assembled if required. | | |