catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
P. 08
P. 09
P. 10
P. 11
P. 12
P. 13
P. 14
P. 15
P. 16
P. 17
P. 18
P. 19
P. 20
P. 21
P. 22
P. 23
P. 24
P. 25
P. 26
P. 27
P. 28
P. 29
P. 30
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You may also be interested in
Wireless transmitter, Differential pressure transmitter, Sensor, Vibrating level switch, Conductive level switch
Text version of the page
Switching – Vibration
The piezo drive is the heart of the sensor, activating the tuning fork tovibrate on its resonance frequency. The frequency of the fork reduces with the immersion. The frequency change is evaluated by the integrated electronics and converted into a switching signal. An optimized screwed connection is used to ensure reliability and ruggedness of the piezo drive. With the tuning fork of only 40 mm length, VEGASWINGs work reliably in all liquids independent of the installation position. Pressure, temperature, foam, viscosity and bubbles do not influence the switching accuracy.
The vibrating rod of VEGAVIB is activated to vibrate via the piezo drive. If the vibrating rod is immersed, the amplitude will be damped. The electronics detects this damping and converts it into a switching command. Due to the rod design, it is almost impossible for material to build up or get wedged in. The easy cleanability offers the requirements for use in the food processing and pharmaceutical industry. The installation position and granulation size do not influence the reliability. Mounting and setup are very easy, an adjustment with medium is not necessary. Typical applications are overfill and dry run protection systems in products such as plastic granules, styrofoam, milk powder and pellets. Can be used in bulk solids from a product density of 20 g/l.
A tuning fork is used as sensor for the VEGAWAVE series. Control as well as processing correspond to VEGAVIB series. The advantages of this series are ruggedness as well as insensitivity to buildup. Therefore, it is the ideal sensor for powders and fine-grained products. Mounting and setup are very easy, an adjustment with medium is not necessary. Typical applications are overfill and dry run protection systems in products such as flour, cement, plastic granules, sand, fine gravel and styrofoam. Can be used in bulk solids from a product density of 8 g/l. 86 - AL-ENSwitching – Vibration
Switching – Vibration - 9136 VEGASWING
For manifold applications in liquids
Measuring principle and applicationsThe piezo drive is the heart of the sensor, activating the tuning fork tovibrate on its resonance frequency. The frequency of the fork reduces with the immersion. The frequency change is evaluated by the integrated electronics and converted into a switching signal. An optimized screwed connection is used to ensure reliability and ruggedness of the piezo drive. With the tuning fork of only 40 mm length, VEGASWINGs work reliably in all liquids independent of the installation position. Pressure, temperature, foam, viscosity and bubbles do not influence the switching accuracy.
VEGAVIB
Reliable switching in granulated bulk solids
Measuring principle and applicationsThe vibrating rod of VEGAVIB is activated to vibrate via the piezo drive. If the vibrating rod is immersed, the amplitude will be damped. The electronics detects this damping and converts it into a switching command. Due to the rod design, it is almost impossible for material to build up or get wedged in. The easy cleanability offers the requirements for use in the food processing and pharmaceutical industry. The installation position and granulation size do not influence the reliability. Mounting and setup are very easy, an adjustment with medium is not necessary. Typical applications are overfill and dry run protection systems in products such as plastic granules, styrofoam, milk powder and pellets. Can be used in bulk solids from a product density of 20 g/l.
VEGAWAVE
Robust and reliable especially for powdery bulk solids
Measuring principle and applicationsA tuning fork is used as sensor for the VEGAWAVE series. Control as well as processing correspond to VEGAVIB series. The advantages of this series are ruggedness as well as insensitivity to buildup. Therefore, it is the ideal sensor for powders and fine-grained products. Mounting and setup are very easy, an adjustment with medium is not necessary. Typical applications are overfill and dry run protection systems in products such as flour, cement, plastic granules, sand, fine gravel and styrofoam. Can be used in bulk solids from a product density of 8 g/l. 86 - AL-ENSwitching – Vibration