Keypad & Procedure of Setting Data

Procedure of Setting Data

ßô To change command frequency from 30.00Hz to 45.50Hz : The same procedure is applied to all other parameters. While the drive is running, the output frequency can bechange to a new command frequency. *Note : Some parameters cannot be changed while the drive is running (refer to the function group table in program parameter descriptions.)

PROG

DRV Manual K/K00 REV 30.00HzDRV Manual K/K00 REV 30.00HzDRV Manual K/K00 REV 30.50Hz

Professional press PROG key and the cursor appears on the lowest digit.Press LEFT key once to move digit.Press UP key 5 time. Press

DRV Manual K/K00 REV 30.50HzDRV Manual K/K00 REV 35.50Hz

SHIFT key once to shift the cursor to next digit. Press UP key 5 time. Press

DRV Manual K/K00 REV 35.50HzDRV Manual K/K00 REV 45.50HzDRV Manual K/K00 REV 45.50Hz

SHIFT key once to shift the cursor to next digit. UP key once to make 4.Press
ENTER ENTER key to store new value. Press

10