| | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | "Again we proved the old adage price isn't everything. In this case it was coolant and our Valenite representative had a better product, and a better knowledge of what we did for a living." A price-conscious Oklahoma City producer of aluminum and titanium aerospace components got the chance to compare products and service regarding their coolant needs. An out-of-town distributor persuaded them to switch from ValCOOL VNT-700 and VNT-920 to a competitive product based solely on price. Originally, a local Valenite distributor, who had extensive knowledge of the shop and its operations, recommended the ValCOOL products based on a combination of performance and employee preferences. After a 30-day test, the shop remains all ValCOOL because, as the customer said, "The new guys didn't have a comparable product or a clue about what we do for a living." Today the relationship between the customer and the distributor is closer than ever. | | |
| | | HISTORY | | |
| | | |
| | | Table of Contents ValCOOL Cutting Fluid Application Guide............2 | | |
| | | |
| | | ValCOOL As a Cutting Fluid System . | | |
| | | 4 | | |
| | | |
| | | |
| | | ValCOOL Product Line Introduction . 5 Specialty Fluids, Cleaners, & Additives.............11-13 | | |
| | | |
| | | |
| | | Fluid Maintenance Equipment . | | |
| | | 14 | | |
| | | |
| | | |
| | | "At first it happened once a day. That represents a lot of lost production..." That's what the finishing manager at a major rail products company said about foaming and chip flow blockage in his flumes due to poor fluid performance. This caused the coolant to form a mist that rose to the ceiling and condensed in the ventilation system, leaving an oily film on the industrial lathes, industrial conveyors and controls. Heavy bacterial growth and odor heightened health concerns. That's when he called Valenite. A thorough cleaning of the central system, conveyors and machines was performed. Then, the system was flushed, and once everything was clean, the ValCOOL VNT-910 full-synthetic metalworking fluid was pumped into the system. Contrary to the performance during the previous 10 months, not one problem developed when the system was started up. Since then, there have been no problems with clogged chips due to coolant; no coolant mist, foaming or foam-related problems; no bacteria growth or odor. Fluid consumption has been cut in half, and tool life has been improved. | | |
| | | Fluid Maintenance Tips & Techniques . | | |
| | | HISTORY | | |
| | | |
| | | 15 | | |
| | | |
| | | |
| | | Troubleshooting..........16-17 Care and Handling.....18-19 ValCOOL Product List and Order Information 20-23 | | |
| | | |
| | | Packaging . | | |
| | | 24 | | |
| | | |
| | | |
| | | Glossary of Cutting Fluid Terms . | | |
| | | 26 | | |
| | | |
| | | |
| | | Customer Service (USA) : 1.800.544.3336 (Canada) : 1.800.265.9504 Technical Support : 1.800.488.9073 Valenite' | | |
| | | 3 | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | |