SIMPLE Standard Units Level switch GENERAL CHARACTERISTICS A wide range of standard units that, for variety of materials and dimensions, offers to the user a simple and economical solution for the control of liquid levels. The units are available with connection cable in lengths of 1.5 m and 3.0 m, other lengths are available on The cable is sealed together with the contact inside the rod with epoxy resin and polymerization is performed in a controlled temperature oven. The principle of operation of these instruments is based by actuation of a reed contact, located inside of the measuring rod, by The only moving element is the float, that moves as a result of hydrostatic thrust, this gives extreme ruggedness and limited need Brass, AISI-316, PVC, Polypropylene, PVDF constructions Working pressure up to 50 bar, depending on the used float Operating ambient temperature -30/+55°C RH 90%. Executions for temperature up to 180 ° C, on request. Minimum degree of protection IP65. . ATEX construction <£x> 1G Exia IIC T6, see SIMPLE ATEX I BRASS / SPANSIL SERIES Butadiene - Acrylonitrile Copolymer Brass Nickel plated brass We reserve the right to change the data without notice ~BOCtOHk www.valco.it

SIMPLE Standard Units Level switch PLASTIC SERIES STAINLESS STEEL SERIES We reserve the right to change the data without notice

Level switch Standard Units ELECTRICAL CONTACTS SPST SPST SPDT SPDT Separately wired contact DIMENSIONAL SUMMARY TABLE mm Male threads G Gas parallel UNI 228/1 2 NC Contact status in no level 1 NO (*) condition 3 SPDT (*) The NO condition is obtained by turning the float of 180° Rod and process connection materials B O S V Nickel plated Brass AISI-316 PVC brass C N Gas conical Conical UNI 7/1 NPT On request ● We reserve the right to change the data without notice Series and type Electrical contact Total length = L0 Rod material Process connection dimension Process connection thread Process connection...