Text version of the page

Feed Terminals End feeds and line feeds with terminal boxes are available. Theyare factory assembled on 1 m Powerail sections.
1912

Powerail enclosed conductor system - 19699 POWERAILS VKS & VKL

Hangers All sections are to be suspended from at least 2 hangers and themaximum permissible support centres of 1 m must be adhered to. The hangers allow free movement of the powerail housing. The fix point in the centre of the run consists of a sliding hangeranchored by two locating clamps.

VKL Powerail Systems

are designed for small current loads and serve for the powersupply of light cranes and for control current systems. The VKL Powerail can also be used for Hoists, Jib Cranes, Power Tools, Machine Tools, electrically operated Gates, Testing Lines, andother Applications. Standard Support Brackets Support brackets for easy installation are available (see page 25). Housing The plastic housing holds up to 5 conductors. The ground con-ductor is identified by international yellow colour code. 4 m stan- dard lengths and shorter sections to coincide with your runwayrequirements are available. VKLPowerails can be used up tosystem lengths of 100 m. Collectors The glider type collectors are guided at the PVC housing. Theyare supplied with 1 m long connecting cable. Longer cables areavailable upon request. The carbon bru-shes have a continuous current capacityof 10 A(15 Aat 60 % intermittent duty). Use two collectors for higher ratings. The towing arm is the mechanical flexible connection between collector and movingequipment. Couplings The mechanical jointing of the Powerail housing is done bymeans of a two-piece plastic joint cap. The conductors get spring-loaded copper connectors. Conductor Dead Sections Conductor dead sections are factoryassembled at any required position of therun.

4